net_halです。 SHARP のノート PC-MV1-C1W でカーネルを 2.4.20-0vl24.2 にアップしたら 突然電源が落ちようになりました。 起動そのものは正常に起動したのですが、alsa の rpm をリビルドしようと したらビルド途中に突然電源が落ちます。 VinePlus の alsa-driver-0.5.12a-0vl0.1.src.rpm で発生しました。 同じものを使って友人は正常にリビルドできましたので、このノートマシン特有 の問題だと思います。 ヒヤヒヤしながら３回試しましたが全て電源が落ちます。 ビルドしないでエディタでファイルを見たりしているだけでは落ちない様です。 HDDアクセス中に電源が落ちてしまうので怖くて色々な設定を試すことが出来ま せんので、ご報告だけです。 仕事にも使っているマシンなので壊れると困るので、2.4.19-0vl26 に戻しました。 (ACPI、PCI等のオプションをカーネルに渡せばＯＫかも知れないですが) 以下に、/var/log/messages の起動部分のみの比較を添付します。 /var/log/messages の時刻等を削除し、ソートしたものを比較しています。 ファイル m2.4.19 が 2.4.19-0vl26 で起動したときのメッセージ ファイル m2.4.20 が 2.4.20-0vl24.2 で起動したときのメッセージです。 --- m2.4.19 Tue Apr 8 10:39:19 2003 +++ m2.4.20 Tue Apr 8 10:41:39 2003 @@ -16,17 +16,18 @@ FreeWnn: Reading /etc/FreeWnn/ja/dic/pubdic/tankan.dic^I Fid = 9 FreeWnn: Starting FreeWnn: PAM_unix[1344]: (wdm) session opened for user root by (uid=0) -alsasound: ALSA driver is already running. +alsasound: Starting sound driver: snd-card-intel8x0 done +alsasound: modprobe: Can't locate module snd-card-intel8x0 anacron: anacron startup succeeded atd: atd startup succeeded autofs: autofs startup succeeded -automount[888]: starting automounter version 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc -automount[888]: using kernel protocol version 3 -cardmgr[992]: watching 1 sockets -cardmgr[993]: starting, version is 3.2.1 +automount[879]: starting automounter version 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc +automount[879]: using kernel protocol version 3 +cardmgr[985]: watching 1 sockets +cardmgr[986]: starting, version is 3.2.1 crond: crond startup succeeded cups: cupsd startup succeeded -dhcpcd[601]: infinite IP address lease time. Exiting +dhcpcd[592]: infinite IP address lease time. Exiting esecanna: esecannaserver startup succeeded esecannaserver: ^IPlugins: esecannaserver: esecanna 1.0.1 @@ -39,8 +40,6 @@ ifup: done. ifup: Determining IP information for eth0... inet: inetd startup succeeded -kernel: ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE15 -kernel: ACPI-0508: *** Info: GPE Block1 defined as GPE16 to GPE31 kernel: ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio kernel: ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio kernel: Type: CD-ROM ANSI SCSI revision: 02 @@ -61,8 +60,8 @@ kernel: BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) kernel: BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > -kernel: ..... CPU clock speed is 996.6972 MHz. -kernel: ..... host bus clock speed is 132.8928 MHz. +kernel: ..... CPU clock speed is 996.7004 MHz. +kernel: ..... host bus clock speed is 132.8932 MHz. kernel: 0MB HIGHMEM available. kernel: 503MB LOWMEM available. kernel: 8139too Fast Ethernet driver 0.9.26 @@ -95,38 +94,42 @@ kernel: ACPI: Power Resource [PFN1] (off) kernel: ACPI: Power Resource [PFN2] (off) kernel: ACPI: Power Resource [PFN3] (off) -kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states, 8 throttling states) kernel: ACPI: RSDP (v000 PTLTD ) @ 0x000f66c0 kernel: ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1f6e9400 kernel: ACPI: SSDT (v001 PTLTD ACPICST1 01540.00000) @ 0x1f6eed9f kernel: ACPI: SSDT (v001 PTLTD ACPIPST1 01540.00000) @ 0x1f6eef23 -kernel: ACPI: Subsystem revision 20021115 -kernel: ACPI: System [ACPI] (supports S0 S3 S4 S5) -kernel: ACPI: Thermal Zone [THRM] (77 C) +kernel: ACPI: Subsystem revision 20030328 +kernel: ACPI: System [ACPI] (supports S0 S3 (swsusp) S4 S5) kernel: ACPI: Using PIC for interrupt routing kernel: Adding Swap: 530104k swap-space (priority -1) kernel: BIOS-provided physical RAM map: kernel: Based upon Swansea University Computer Society NET3.039 kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) -kernel: CPU0<T0:1328928,T1:664464,D:0,S:664464,C:1328928> +kernel: CPU0<T0:1328928,T1:664448,D:14,S:664466,C:1328932> kernel: CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K +kernel: CPU: L2 cache: 512K kernel: Calibrating delay loop... 1985.74 BogoMIPS kernel: Checking 'hlt' instruction... OK. kernel: Console: colour VGA+ 80x25 kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) -kernel: Detected 996.704 MHz processor. +kernel: Detected 996.695 MHz processor. kernel: ESR value after enabling vector: 00000000 kernel: ESR value before enabling vector: 00000000 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal +kernel: EXT3-fs: INFO: recovery required on readonly filesystem. +kernel: EXT3-fs: ide0(3,6): 4 orphan inodes deleted +kernel: EXT3-fs: ide0(3,6): orphan cleanup on readonly fs kernel: EXT3-fs: mounted filesystem with ordered data mode. +kernel: EXT3-fs: recovery complete. +kernel: EXT3-fs: write access will be enabled during recovery. kernel: Enabling fast FPU save and restore... done. kernel: Enabling unmasked SIMD FPU exception support... done. kernel: Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@xxxxxxx) kernel: Found and enabled local APIC! -kernel: Freeing unused kernel memory: 124k freed -kernel: ICH3M: BIOS setup was incomplete. -kernel: ICH3M: IDE controller on PCI bus 00 dev f9 +kernel: Freeing unused kernel memory: 136k freed +kernel: Highpoint HPT370 Softwareraid driver for linux version 0.01 +kernel: ICH3M: IDE controller at PCI slot 00:1f.1 kernel: ICH3M: chipset revision 2 kernel: ICH3M: not 100%% native mode: will probe irqs later kernel: IP Protocols: ICMP, UDP, TCP, IGMP @@ -135,22 +138,24 @@ kernel: Initializing RT netlink socket kernel: Initializing USB Mass Storage driver... kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes) -kernel: Inspecting /boot/System.map-2.4.19-0vl26 +kernel: Inspecting /boot/System.map-2.4.20-0vl24.2 kernel: Journalled Block Device driver loaded -kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=306 BOOT_FILE=/boot/vmlinuz-2.4.19-0vl26 hdc=ide-scsi +kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=306 BOOT_FILE=/boot/vmlinuz-2.4.20-0vl24.2 hdc=ide-scsi kernel: Linux IP multicast router 0.06 plus PIM-SM kernel: Linux Kernel Card Services 3.1.22 kernel: Linux NET4.0 for Linux 2.4 -kernel: Linux version 2.4.19-0vl26 (root@xxxxxxxxxxxxxxxxx) (gcc version 2.95.3 20010315 (release)) #1 2002年 11月 23日 土曜日 09:48:34 JST -kernel: Loaded 19729 symbols from /boot/System.map-2.4.19-0vl26. -kernel: Loaded 520 symbols from 23 modules. +kernel: Linux version 2.4.20-0vl24.2 (farmer@xxxxxxxxxxxxxxxxx) (gcc version 2.95.3 20010315 (release)) #1 Sun Apr 6 00:24:28 EST 2003 +kernel: Loaded 20867 symbols from /boot/System.map-2.4.20-0vl24.2. +kernel: Loaded 263 symbols from 14 modules. kernel: Local APIC disabled by BIOS -- reenabling. -kernel: Memory: 506360k/515584k available (1498k kernel code, 8704k reserved, 683k data, 124k init, 0k highmem) -kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) +kernel: Memory: 506188k/515584k available (1579k kernel code, 8876k reserved, 735k data, 136k init, 0k highmem) +kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) kernel: NET4: Linux TCP/IP 1.0 for NET4.0 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +kernel: No raid array found kernel: On node 0 totalpages: 128896 -kernel: PCI: Device 00:1f.1 not available because of resource collisions +kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007) +kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd99a, last bus=2 kernel: PCI: Probing PCI hardware kernel: PCI: Probing PCI hardware (bus 00) @@ -166,11 +171,11 @@ kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled kernel: Socket status: 30000006 kernel: Starting kswapd -kernel: Symbols match kernel version 2.4.19. +kernel: Symbols match kernel version 2.4.20. kernel: TCP: Hash tables configured (established 32768 bind 32768) kernel: Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge kernel: USB Mass Storage support registered. -kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 +kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 kernel: Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky kernel: Using local APIC timer interrupts. kernel: VFS: Diskquotas version dquot_6.4.0 initialized @@ -178,10 +183,13 @@ kernel: Yenta IRQ list 08d0, PCI irq10 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) kernel: apm: overridden by ACPI. -kernel: blk: queue c037a5e4, I/O limit 4095Mb (mask 0xffffffff) -kernel: bond0 registered without MII link monitoring, in bonding mode. +kernel: blk: queue c03a0640, I/O limit 4095Mb (mask 0xffffffff) +kernel: bond0 registered without ARP monitoring +kernel: bond0 registered without MII link monitoring, in load balancing (round-robin) mode. +kernel: bonding.c:v2.4.20-20021210 (December 10, 2002) +kernel: bonding_init(): either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. kernel: calibrating APIC timer ... -kernel: cpu: 0, clocks: 1328928, slice: 664464 +kernel: cpu: 0, clocks: 1328932, slice: 664466 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 kernel: cs: IO port probe 0x0a00-0x0aff: clean. kernel: cs: IO port probe 0x0c00-0x0cff: clean. @@ -193,6 +201,7 @@ kernel: floppy0: no floppy controllers found kernel: hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100) kernel: hda: HITACHI_DK23DA-30, ATA DISK drive +kernel: hda: host protected area => 1 kernel: hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive kernel: hid-core.c: USB HID support drivers kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> @@ -214,13 +223,14 @@ kernel: klogd 1.4-0, log source = /proc/kmsg started. kernel: loop: loaded (max 8 devices) kernel: lp0: using parport0 (polling). -kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kernel: mice: PS/2 mouse device common for all mice kernel: mtrr: detected mtrr type: Intel kernel: mtrr: no more MTRRs available +kernel: mtrr: no more MTRRs available kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] +kernel: powernow: AMD processor not detected. kernel: pty: 256 Unix98 ptys configured kernel: schedule_task(): keventd has not started kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices @@ -235,8 +245,8 @@ kernel: usb.c: registered new driver hiddev kernel: usb.c: registered new driver hub kernel: usb.c: registered new driver usb-storage -kernel: usb.c: registered new driver usb_mouse kernel: usb.c: registered new driver usbdevfs +kernel: usb.c: registered new driver usbmouse kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse driver kernel: zone(0): 4096 pages. kernel: zone(1): 124800 pages. @@ -245,24 +255,28 @@ keytable: Loading keymap: keytable: Loading system font: last message repeated 118 times +last message repeated 118 times last message repeated 4 times -lisa: -lisa: -lisa: Copyright (c) 2000 by Alexander Neundorf -lisa: It is free software according the GNU General Public License -lisa: This is the LAN Information Server LISa 0.2.1 -lisa: email: neundorf@xxxxxxx +last message repeated 7 times lisa: lisa startup succeeded modprobe: modprobe: Can't locate module char-major-10-134 +modprobe: modprobe: Can't locate module char-major-10-134 +modprobe: modprobe: Can't locate module char-major-116 +modprobe: modprobe: Can't locate module sound-service-0-0 +modprobe: modprobe: Can't locate module sound-service-0-0 +modprobe: modprobe: Can't locate module sound-service-0-3 modprobe: modprobe: Can't locate module sound-service-1-0 modprobe: modprobe: Can't locate module sound-service-1-0 +modprobe: modprobe: Can't locate module sound-slot-0 +modprobe: modprobe: Can't locate module sound-slot-0 +modprobe: modprobe: Can't locate module sound-slot-0 modprobe: modprobe: Can't locate module sound-slot-1 modprobe: modprobe: Can't locate module sound-slot-1 netfs: Mounting other filesystems: succeeded network: Bringing up interface eth0: succeeded nfslock: rpc.statd startup succeeded pcmcia: Starting PCMCIA services: -pcmcia: cardmgr[992]: watching 1 sockets +pcmcia: cardmgr[985]: watching 1 sockets pcmcia: done. portmap: portmap startup succeeded postfix: Starting postfix: @@ -270,7 +284,7 @@ postfix: postfix postfix: postmap: fatal: My hostname tigerII is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf proftpd: proftpd startup succeeded -proftpd[1120]: tigerII - ProFTPD 1.2.5rc1 (release) (built Thu Jan 31 19:01:49 JST 2002) standalone mode STARTUP +proftpd[1113]: tigerII - ProFTPD 1.2.5rc1 (release) (built Thu Jan 31 19:01:49 JST 2002) standalone mode STARTUP random: Initializing random number generator: succeeded rc: Starting FreeWnn: succeeded rc: Starting alsasound: succeeded @@ -280,7 +294,7 @@ rc: Starting sshd: succeeded rc: Starting vje30: succeeded rc: Starting webmin: succeeded -rpc.statd[842]: Version 0.3.1 Starting +rpc.statd[833]: Version 0.3.1 Starting snort: snort: Flip backslash to slash snort: IIS alternate Unicode decoding @@ -308,7 +322,7 @@ snort: PID path stat checked out ok, PID path set to /var/run/ snort: Portscan2 config: snort: Snort initialization completed successfully, Snort running -snort: Writing PID "965" to file "/var/run//snort_eth0.pid" +snort: Writing PID "956" to file "/var/run//snort_eth0.pid" snort: http_decode arguments: snort: rpc_decode arguments: snort: telnet_decode arguments: @@ -323,7 +337,6 @@ vje30: vje30: VJE-Delta Ver.3.0 Server Start vje30: VJE-Delta Ver.3.0 for Linux/BSD -webmin: Starting Webmin server in /usr/libexec/webmin xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/latin2/Type1 (unreadable) xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/local (unreadable) xfs: ignoring font path element /usr/share/AbiSuite/fonts (unreadable)