vine-users ML アーカイブ



[vine-users:065228] Re: DVD-R/RW で書き込みができない。

  • From: Masa Takahashi <masa@xxxxxxxxxxxxxxxxxxx>
  • Subject: [vine-users:065228] Re: DVD-R/RW で書き込みができない。
  • Date: Wed, 31 Mar 2004 21:13:39 +0900
こんばんわ、政です。


yasu23 wrote:
> VineLinux2.6r4でDVD-R/RWを使うための、パッケージをftpサイトよりダウン
> ロードして

> 
> を入力して、xcdroastでDVD-Rのメディアの認識まではするのですが、
> いざファイルを書き込もうとすると、なぜか以下のようなエラーが発生して書き
> 込みができません。
> 
> Using libscg version 'schily-0.8'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'DVDRW '
> Identifikation : 'IDE1004 '
> Revision : '0045'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: DVD-R sequential recording
> Profile: DVD+R
> Profile: DVD+RW
> Profile: DVD-RW sequential overwrite
> Profile: DVD-RW restricted overwrite
> Profile: DVD-R sequential recording (current)
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
> Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1376256 = 1344 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 56 MB padsize: 30 KB
> Total size: 56 MB = 28829 sectors
> Current Secsize: 2048
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2269667
> Starting to write CD/DVD at speed 4 in real SAO mode for single session.
> 
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
> BURN-Free is OFF.
> CDB: 2A 00 00 00 00 00 00 00 1F 00
> Turning BURN-Free on
> status: 0x2 (CHECK CONDITION)
> Starting new track at sector: 0
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 100s
> cdrecord.prodvd: A write error occured.
> cdrecord.prodvd: Please properly read the error message above.
> 
> write track data: error after 0 bytes
> Writing time: 5.085s
> Average write speed 8.5x.
> Fixating...
> Fixating time: 0.047s
> BURN-Free was not used.
> cdrecord.prodvd: fifo had 64 puts and 1 gets.
> cdrecord.prodvd: fifo was 0 times empty and 0 times full, min fill was 100%.
> 
> 

まさかとは思いますが、SCSIエミュレーションをしていないという事は
無いですよね?

ところで、
dvd+rw-tools-5.17.4.8.6 とか
dvdrecord-0.1.4
というソフトだといかがですか?