vine-users ML アーカイブ



[vine-users:082720] Vine 6.3 で X起動不能

竹中@長岡京市です。

Vine を6.3にアップデートしたら、Xが起動しなくなりました。
Xorg.0.logには、EEは表示されていません。

以下、Xorg.0.logです。
---

[    55.169] 
X.Org X Server 1.10.2
Release Date: 2011-05-28
[    55.169] X Protocol Version 11, Revision 0
[    55.169] Build Operating System: Vine Linux 6 
[    55.169] Current Operating System: Linux Vine6_32-PC 3.4.106-1vl6 #1 SMP Mon Feb 9 16:15:55 JST 2015 i686
[    55.169] Kernel command line: ro root=LABEL=/1 resume=swap:/dev/sda5 vga=0x314 splash=silent quiet
[    55.169] Build Date: 14 February 2015  11:44:03PM
[    55.169] Build ID: xorg-x11-server 1.10.2-9vl6 
[    55.169] Current version of pixman: 0.26.2
[    55.169] 	Before reporting problems, check http://vinelinux.org/
	to make sure that you have the latest version.
[    55.169] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    55.170] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 27 16:11:18 2015
[    55.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    55.248] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    55.294] (==) No Layout section.  Using the first Screen section.
[    55.294] (==) No screen section available. Using defaults.
[    55.294] (**) |-->Screen "Default Screen Section" (0)
[    55.294] (**) |   |-->Monitor "<default monitor>"
[    55.294] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    55.294] (==) Automatically adding devices
[    55.294] (==) Automatically enabling devices
[    55.294] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    55.294] (==) ModulePath set to "/usr/lib/xorg/modules"
[    55.294] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    55.294] (II) Loader magic: 0x8216860
[    55.294] (II) Module ABI versions:
[    55.294] 	X.Org ANSI C Emulation: 0.4
[    55.294] 	X.Org Video Driver: 10.0
[    55.294] 	X.Org XInput driver : 12.2
[    55.294] 	X.Org Server Extension : 5.0
[    55.295] (--) PCI:*(0:0:2:0) 8086:2e32:1028:043e rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec00/8, BIOS @ 0x????????/131072
[    55.295] (II) LoadModule: "extmod"
[    55.313] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    55.318] (II) Module extmod: vendor="X.Org Foundation"
[    55.318] 	compiled for 1.10.2, module version = 1.0.0
[    55.318] 	Module class: X.Org Server Extension
[    55.318] 	ABI class: X.Org Server Extension, version 5.0
[    55.318] (II) Loading extension MIT-SCREEN-SAVER
[    55.318] (II) Loading extension XFree86-VidModeExtension
[    55.318] (II) Loading extension XFree86-DGA
[    55.318] (II) Loading extension DPMS
[    55.318] (II) Loading extension XVideo
[    55.318] (II) Loading extension XVideo-MotionCompensation
[    55.318] (II) Loading extension X-Resource
[    55.318] (II) LoadModule: "dbe"
[    55.318] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    55.326] (II) Module dbe: vendor="X.Org Foundation"
[    55.326] 	compiled for 1.10.2, module version = 1.0.0
[    55.326] 	Module class: X.Org Server Extension
[    55.326] 	ABI class: X.Org Server Extension, version 5.0
[    55.326] (II) Loading extension DOUBLE-BUFFER
[    55.326] (II) LoadModule: "glx"
[    55.327] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    55.334] (II) Module glx: vendor="X.Org Foundation"
[    55.334] 	compiled for 1.10.2, module version = 1.0.0
[    55.334] 	ABI class: X.Org Server Extension, version 5.0
[    55.334] (==) AIGLX enabled
[    55.334] (II) Loading extension GLX
[    55.334] (II) LoadModule: "record"
[    55.335] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    55.339] (II) Module record: vendor="X.Org Foundation"
[    55.339] 	compiled for 1.10.2, module version = 1.13.0
[    55.339] 	Module class: X.Org Server Extension
[    55.339] 	ABI class: X.Org Server Extension, version 5.0
[    55.339] (II) Loading extension RECORD
[    55.339] (II) LoadModule: "dri"
[    55.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    55.353] (II) Module dri: vendor="X.Org Foundation"
[    55.353] 	compiled for 1.10.2, module version = 1.0.0
[    55.353] 	ABI class: X.Org Server Extension, version 5.0
[    55.353] (II) Loading extension XFree86-DRI
[    55.353] (II) LoadModule: "dri2"
[    55.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    55.354] (II) Module dri2: vendor="X.Org Foundation"
[    55.354] 	compiled for 1.10.2, module version = 1.2.0
[    55.354] 	ABI class: X.Org Server Extension, version 5.0
[    55.354] (II) Loading extension DRI2
[    55.354] (==) Matched intel as autoconfigured driver 0
[    55.354] (==) Matched vesa as autoconfigured driver 1
[    55.354] (==) Matched fbdev as autoconfigured driver 2
[    55.354] (==) Assigned the driver to the xf86ConfigLayout
[    55.354] (II) LoadModule: "intel"
[    55.355] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    55.368] (II) Module intel: vendor="X.Org Foundation"
[    55.368] 	compiled for 1.10.2, module version = 2.17.0
[    55.368] 	Module class: X.Org Video Driver
[    55.368] 	ABI class: X.Org Video Driver, version 10.0
[    55.368] (II) LoadModule: "vesa"
[    55.368] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    55.373] (II) Module vesa: vendor="X.Org Foundation"
[    55.373] 	compiled for 1.10.0, module version = 2.3.0
[    55.373] 	Module class: X.Org Video Driver
[    55.373] 	ABI class: X.Org Video Driver, version 10.0
[    55.373] (II) LoadModule: "fbdev"
[    55.373] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    55.379] (II) Module fbdev: vendor="X.Org Foundation"
[    55.379] 	compiled for 1.10.0, module version = 0.4.2
[    55.379] 	ABI class: X.Org Video Driver, version 10.0
[    55.379] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    55.379] (II) VESA: driver for VESA chipsets: vesa
[    55.379] (II) FBDEV: driver for framebuffer: fbdev
[    55.379] (--) using VT number 7

[    55.392] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    55.392] (WW) Falling back to old probe method for vesa
[    55.392] (WW) Falling back to old probe method for fbdev
[    55.392] (II) Loading sub module "fbdevhw"
[    55.392] (II) LoadModule: "fbdevhw"
[    55.392] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    55.403] (II) Module fbdevhw: vendor="X.Org Foundation"
[    55.403] 	compiled for 1.10.2, module version = 0.0.2
[    55.403] 	ABI class: X.Org Video Driver, version 10.0
[    55.403] drmOpenDevice: node name is /dev/dri/card0
[    55.403] drmOpenDevice: open result is 8, (OK)
[    55.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    55.403] drmOpenDevice: node name is /dev/dri/card0
[    55.403] drmOpenDevice: open result is 8, (OK)
[    55.403] drmOpenByBusid: drmOpenMinor returns 8
[    55.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    55.403] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    55.403] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    55.403] (==) intel(0): RGB weight 888
[    55.403] (==) intel(0): Default visual is TrueColor
[    55.403] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41
[    55.403] (--) intel(0): Chipset: "G41"
[    55.404] (**) intel(0): Relaxed fencing enabled
[    55.404] (**) intel(0): Wait on SwapBuffers? enabled
[    55.404] (**) intel(0): Triple buffering? enabled
[    55.404] (**) intel(0): Framebuffer tiled
[    55.404] (**) intel(0): Pixmaps tiled
[    55.404] (**) intel(0): 3D buffers tiled
[    55.404] (**) intel(0): SwapBuffers wait enabled
[    55.404] (==) intel(0): video overlay key set to 0x101fe
[    55.461] (II) intel(0): Output VGA1 has no monitor section
[    55.512] (II) intel(0): EDID for output VGA1
[    55.512] (II) intel(0): Manufacturer: DEL  Model: d023  Serial#: 808600396
[    55.512] (II) intel(0): Year: 2011  Week: 13
[    55.512] (II) intel(0): EDID Version: 1.3
[    55.512] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    55.512] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    55.512] (II) intel(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    55.512] (II) intel(0): Gamma: 2.20
[    55.512] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    55.512] (II) intel(0): Default color space is primary color space
[    55.512] (II) intel(0): First detailed timing is preferred mode
[    55.512] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    55.512] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    55.512] (II) intel(0): Supported established timings:
[    55.512] (II) intel(0): 720x400@70Hz
[    55.512] (II) intel(0): 640x480@60Hz
[    55.512] (II) intel(0): 640x480@75Hz
[    55.512] (II) intel(0): 800x600@60Hz
[    55.512] (II) intel(0): 800x600@75Hz
[    55.512] (II) intel(0): 1024x768@60Hz
[    55.512] (II) intel(0): 1024x768@75Hz
[    55.512] (II) intel(0): Manufacturer's mask: 0
[    55.512] (II) intel(0): Supported detailed timing:
[    55.512] (II) intel(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
[    55.512] (II) intel(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[    55.512] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[    55.512] (II) intel(0): Serial No: C197P13V02CL
[    55.512] (II) intel(0): Monitor name: DELL E1910H
[    55.512] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 95 MHz
[    55.512] (II) intel(0): EDID (in hex):
[    55.512] (II) intel(0): 	00ffffffffffff0010ac23d04c433230
[    55.513] (II) intel(0): 	0d1501030e291778eeee95a3544c9926
[    55.513] (II) intel(0): 	0f5054a54a0001010101010101010101
[    55.513] (II) intel(0): 	010101010101662156aa51001e30468f
[    55.513] (II) intel(0): 	33009ae61000001e000000ff00433139
[    55.513] (II) intel(0): 	37503133563032434c0a000000fc0044
[    55.513] (II) intel(0): 	454c4c204531393130480a20000000fd
[    55.513] (II) intel(0): 	00384b1e5309000a202020202020000e
[    55.513] (II) intel(0): EDID vendor "DEL", prod id 53283
[    55.513] (II) intel(0): Using EDID range info for horizontal sync
[    55.513] (II) intel(0): Using EDID range info for vertical refresh
[    55.513] (II) intel(0): Printing DDC gathered Modelines:
[    55.513] (II) intel(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[    55.513] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.513] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.513] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.513] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.513] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    55.513] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.513] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.513] (II) intel(0): Printing probed modes for output VGA1
[    55.513] (II) intel(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[    55.513] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    55.513] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    55.513] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    55.513] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    55.513] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    55.513] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    55.513] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    55.513] (II) intel(0): Output VGA1 connected
[    55.513] (II) intel(0): Using exact sizes for initial modes
[    55.513] (II) intel(0): Output VGA1 using initial mode 1366x768 +0+0
[    55.513] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    55.513] (II) intel(0): Kernel page flipping support detected, enabling
[    55.513] (++) intel(0): DPI set to (96, 96)
[    55.513] (II) Loading sub module "fb"
[    55.513] (II) LoadModule: "fb"
[    55.513] (II) Loading /usr/lib/xorg/modules/libfb.so
[    55.524] (II) Module fb: vendor="X.Org Foundation"
[    55.524] 	compiled for 1.10.2, module version = 1.0.0
[    55.524] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    55.524] (II) Loading sub module "dri2"
[    55.524] (II) LoadModule: "dri2"
[    55.525] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    55.525] (II) Module dri2: vendor="X.Org Foundation"
[    55.525] 	compiled for 1.10.2, module version = 1.2.0
[    55.525] 	ABI class: X.Org Server Extension, version 5.0
[    55.525] (II) UnloadModule: "vesa"
[    55.525] (II) Unloading vesa
[    55.525] (II) UnloadModule: "fbdev"
[    55.525] (II) Unloading fbdev
[    55.525] (II) UnloadModule: "fbdevhw"
[    55.525] (II) Unloading fbdevhw
[    55.525] (==) Depth 24 pixmap format is 32 bpp
[    55.525] (II) intel(0): [DRI2] Setup complete
[    55.525] (II) intel(0): [DRI2]   DRI driver: i965
[    55.525] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    55.548] (II) UXA(0): Driver registered support for the following operations:
[    55.548] (II)         solid
[    55.548] (II)         copy
[    55.548] (II)         composite (RENDER acceleration)
[    55.548] (II)         put_image
[    55.549] (II)         get_image
[    55.549] (==) intel(0): Backing store disabled
[    55.549] (==) intel(0): Silken mouse enabled
[    55.551] (II) intel(0): Initializing HW Cursor
[    55.568] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    55.568] (==) intel(0): DPMS enabled
[    55.568] (==) intel(0): Intel XvMC decoder enabled
[    55.568] (II) intel(0): Set up textured video
[    55.568] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    55.568] (II) intel(0): direct rendering: DRI2 Enabled
[    55.568] (==) intel(0): hotplug detection: "enabled"
[    55.568] (--) RandR disabled
[    55.568] (II) Initializing built-in extension Generic Event Extension
[    55.568] (II) Initializing built-in extension SHAPE
[    55.568] (II) Initializing built-in extension MIT-SHM
[    55.568] (II) Initializing built-in extension XInputExtension
[    55.568] (II) Initializing built-in extension XTEST
[    55.568] (II) Initializing built-in extension BIG-REQUESTS
[    55.568] (II) Initializing built-in extension SYNC
[    55.568] (II) Initializing built-in extension XKEYBOARD
[    55.568] (II) Initializing built-in extension XC-MISC
[    55.568] (II) Initializing built-in extension XINERAMA
[    55.568] (II) Initializing built-in extension XFIXES
[    55.568] (II) Initializing built-in extension RENDER
[    55.568] (II) Initializing built-in extension RANDR
[    55.568] (II) Initializing built-in extension COMPOSITE
[    55.568] (II) Initializing built-in extension DAMAGE
[    55.643] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    55.643] (II) AIGLX: enabled GLX_INTEL_swap_event
[    55.643] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    55.643] (II) AIGLX: enabled GLX_SGI_make_current_read
[    55.643] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    55.643] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[    55.643] (II) GLX: Initialized DRI2 GL provider for screen 0
[    55.644] (II) intel(0): Setting screen physical size to 361 x 203
[    55.973] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    55.973] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    55.973] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    55.973] (II) LoadModule: "evdev"
[    55.973] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    55.980] (II) Module evdev: vendor="X.Org Foundation"
[    55.980] 	compiled for 1.10.0, module version = 2.6.0
[    55.980] 	Module class: X.Org XInput Driver
[    55.980] 	ABI class: X.Org XInput driver, version 12.2
[    55.980] (II) Using input driver 'evdev' for 'Power Button'
[    55.980] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    55.980] (**) Power Button: always reports core events
[    55.980] (**) Power Button: Device: "/dev/input/event1"
[    55.980] (--) Power Button: Found keys
[    55.980] (II) Power Button: Configuring as keyboard
[    55.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    55.980] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    55.980] (**) Option "xkb_rules" "evdev"
[    55.980] (**) Option "xkb_model" "jp106"
[    55.980] (**) Option "xkb_layout" "jp"
[    55.980] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    56.005] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    56.006] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    56.006] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    56.006] (II) Using input driver 'evdev' for 'Power Button'
[    56.006] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    56.006] (**) Power Button: always reports core events
[    56.006] (**) Power Button: Device: "/dev/input/event0"
[    56.006] (--) Power Button: Found keys
[    56.006] (II) Power Button: Configuring as keyboard
[    56.006] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    56.006] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    56.006] (**) Option "xkb_rules" "evdev"
[    56.006] (**) Option "xkb_model" "jp106"
[    56.006] (**) Option "xkb_layout" "jp"
[    56.006] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    56.007] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event10)
[    56.008] (II) No input driver/identifier specified (ignoring)
[    56.008] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[    56.008] (II) No input driver/identifier specified (ignoring)
[    56.008] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[    56.008] (II) No input driver/identifier specified (ignoring)
[    56.008] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    56.008] (II) No input driver/identifier specified (ignoring)
[    56.009] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[    56.009] (II) No input driver/identifier specified (ignoring)
[    56.010] (II) config/udev: Adding input device Chicony PFU-68 USB Keyboard (/dev/input/event2)
[    56.010] (**) Chicony PFU-68 USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    56.010] (**) Chicony PFU-68 USB Keyboard: Applying InputClass "system-setup-keyboard"
[    56.010] (II) Using input driver 'evdev' for 'Chicony PFU-68 USB Keyboard'
[    56.010] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    56.010] (**) Chicony PFU-68 USB Keyboard: always reports core events
[    56.010] (**) Chicony PFU-68 USB Keyboard: Device: "/dev/input/event2"
[    56.010] (--) Chicony PFU-68 USB Keyboard: Found keys
[    56.010] (II) Chicony PFU-68 USB Keyboard: Configuring as keyboard
[    56.011] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input2/event2"
[    56.011] (II) XINPUT: Adding extended input device "Chicony PFU-68 USB Keyboard" (type: KEYBOARD)
[    56.011] (**) Option "xkb_rules" "evdev"
[    56.011] (**) Option "xkb_model" "jp106"
[    56.011] (**) Option "xkb_layout" "jp"
[    56.011] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    56.011] (II) config/udev: Adding input device ELECOM ELECOM WIRELESS LASER MOUSE (/dev/input/event3)
[    56.011] (**) ELECOM ELECOM WIRELESS LASER MOUSE: Applying InputClass "evdev pointer catchall"
[    56.011] (II) Using input driver 'evdev' for 'ELECOM ELECOM WIRELESS LASER MOUSE'
[    56.011] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: always reports core events
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: Device: "/dev/input/event3"
[    56.012] (--) ELECOM ELECOM WIRELESS LASER MOUSE: Found 12 mouse buttons
[    56.012] (--) ELECOM ELECOM WIRELESS LASER MOUSE: Found scroll wheel(s)
[    56.012] (--) ELECOM ELECOM WIRELESS LASER MOUSE: Found relative axes
[    56.012] (--) ELECOM ELECOM WIRELESS LASER MOUSE: Found x and y relative axes
[    56.012] (II) ELECOM ELECOM WIRELESS LASER MOUSE: Configuring as mouse
[    56.012] (II) ELECOM ELECOM WIRELESS LASER MOUSE: Adding scrollwheel support
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: YAxisMapping: buttons 4 and 5
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    56.012] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/input/input3/event3"
[    56.012] (II) XINPUT: Adding extended input device "ELECOM ELECOM WIRELESS LASER MOUSE" (type: MOUSE)
[    56.012] (II) ELECOM ELECOM WIRELESS LASER MOUSE: initialized for relative axes.
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: (accel) keeping acceleration scheme 1
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: (accel) acceleration profile 0
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: (accel) acceleration factor: 2.000
[    56.012] (**) ELECOM ELECOM WIRELESS LASER MOUSE: (accel) acceleration threshold: 4
[    56.012] (II) config/udev: Adding input device ELECOM ELECOM WIRELESS LASER MOUSE (/dev/input/mouse0)
[    56.012] (II) No input driver/identifier specified (ignoring)
[    56.013] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[    56.013] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    56.013] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    56.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    56.013] (**) Logitech USB Optical Mouse: always reports core events
[    56.013] (**) Logitech USB Optical Mouse: Device: "/dev/input/event4"
[    56.013] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[    56.013] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[    56.013] (--) Logitech USB Optical Mouse: Found relative axes
[    56.013] (--) Logitech USB Optical Mouse: Found x and y relative axes
[    56.013] (II) Logitech USB Optical Mouse: Configuring as mouse
[    56.013] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[    56.013] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    56.013] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    56.013] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.3/3-2.3:1.0/input/input4/event4"
[    56.013] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[    56.013] (II) Logitech USB Optical Mouse: initialized for relative axes.
[    56.013] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    56.013] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    56.013] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    56.013] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    56.014] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[    56.014] (II) No input driver/identifier specified (ignoring)
[    56.018] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    56.018] (II) No input driver/identifier specified (ignoring)
[    56.054] (II) Power Button: Close
[    56.054] (II) UnloadModule: "evdev"
[    56.054] (II) Unloading evdev
[    56.054] (II) Power Button: Close
[    56.054] (II) UnloadModule: "evdev"
[    56.054] (II) Unloading evdev
[    56.054] (II) Chicony PFU-68 USB Keyboard: Close
[    56.054] (II) UnloadModule: "evdev"
[    56.054] (II) Unloading evdev
[    56.056] (II) ELECOM ELECOM WIRELESS LASER MOUSE: Close
[    56.056] (II) UnloadModule: "evdev"
[    56.056] (II) Unloading evdev
[    56.058] (II) Logitech USB Optical Mouse: Close
[    56.058] (II) UnloadModule: "evdev"
[    56.058] (II) Unloading evdev

-- 
*************************************
* Hiroshi Takenaka
* Nagaokakyo, Kyoto, 617-0833 Japan
*************************************

_______________________________________________
vine-users mailing list
vine-users@xxxxxxxxxxxxxxxxxxxx
http://listserv.linux.or.jp/mailman/listinfo/vine-users