specs/g/glibc/glibc-vl.spec

%bcond_with gcc5
%bcond_with systemd

# To build compat32-glibc, pass "--target i686" to rpmbuild on x86_64.
%if "%{_target_cpu}" != "%(uname -p)"
%global _sourcedir %{_topdir}/SOURCES/glibc
%define build_compat32 1
%define compat32_prefix compat32-
%define compat32_group ,legacy
%else
%define build_compat32 0
%endif

%define glibcversion 2.36
%define glibcsrcdir glibc-%{glibcversion}

Summary: The GNU libc libraries
Summary(ja): GNU libc ライブラリ
Name: %{?compat32_prefix}glibc
Version: %{glibcversion}
Release: 1%{?_dist_release}%{?with_systemd:.systemd}
Group: system%{?compat32_group}
Vendor: Project Vine
Distribution: Vine Linux

# GPLv2+ is used in a bunch of programs, LGPLv2+ is used for libraries.
# Things that are linked directly into dynamically linked programs
# and shared libraries (e.g. crt files, lib*_nonshared.a) have an additional
# exception which allows linking it into any kind of programs or shared
# libraries without restrictions.
License: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+
URL: http://www.gnu.org/software/glibc/
Source0: https://ftp.gnu.org/gnu/glibc/%{glibcsrcdir}.tar.xz
Source1: build-locale-archive.c
Source4: nscd.conf
Source7: nsswitch.conf.vine
Source8: power6emul.c
Source9: bench.mk
Source10: glibc-bench-compare
# A copy of localedata/SUPPORTED in the Source0 tarball.  The
# SUPPORTED file is used below to generate the list of locale
# packages, using a Lua snippet.
Source11: SUPPORTED
Source12: wrap-find-debuginfo.sh

Source1000: rpm-old-changelog.txt

######################################################################
# Activate the wrapper script for debuginfo generation, by rewriting
# the definition of __debug_install_post.
%{lua:
local wrapper = rpm.expand("%{SOURCE12}")
local sysroot = rpm.expand("%{glibc_sysroot}")
local original = rpm.expand("%{macrobody:__debug_install_post}")
-- Strip leading newline.  It confuses the macro redefinition.
-- Avoid embedded newlines that confuse the macro definition.
original = original:match("^%s*(.-)%s*$"):gsub("\\\n", "")
rpm.define("__debug_install_post bash " .. wrapper
  .. " " .. sysroot .. " " .. original)
}

# The wrapper script relies on the fact that debugedit does not change
# build IDs.
%define _no_recompute_build_ids 1
%undefine _unique_build_ids

# patch from upstream
Patch0: glibc-2.36-20220908.patch

# patches from Fedora
Patch4: glibc-fedora-linux-tcsetattr.patch
Patch8: glibc-fedora-manual-dircategory.patch
Patch9: glibc-rh827510.patch
Patch13: glibc-fedora-localedata-rh61908.patch
Patch17: glibc-cs-path.patch
Patch23: glibc-python3.patch

# patch for Vine
Patch1000: glibc-fedora-locarchive.patch
#Patch10001: glibc-2.18-vine-build-env.patch

# security

### glibc.spec.in follows:
%define run_glibc_tests 1
%define auxarches athlon sparcv9v sparc64v alphaev6
%if %{build_compat32}
%define auxarches i686 i586 athlon sparcv9 alphaev6
%endif
%define xenarches i686 athlon
%ifarch %{xenarches}
%define buildxen 1
%define xenpackage 0
%else
%define buildxen 0
%define xenpackage 0
%endif
%ifarch ppc64
%define buildpower6 1
%else
%define buildpower6 0
%endif
%define biarcharches %{ix86} x86_64 ppc ppc64 s390 s390x
%global _enable_debug_packages 1
%define debuginfocommonarches %{biarcharches} alpha alphaev6
%define multiarcharches ppc ppc64 %{ix86} x86_64 %{sparc}
# Remove -s to get verbose output.
%define silentrules PARALLELMFLAGS=-s

# Only some architectures have static PIE support.
%define pie_arches %{ix86} x86_64

# We need to run ldconfig manually because __brp_ldconfig assumes that
# glibc itself is always installed in $RPM_BUILD_ROOT, but with sysroots
# we may be installed into a subdirectory of that path.  Therefore we
# unset __brp_ldconfig and run ldconfig by hand with the sysroots path
# passed to -r.
%undefine __brp_ldconfig

BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
%if %{build_compat32}
Requires: glibc >= %{version}-%{release}
%else
Requires: glibc-common = %{version}-%{release}
Provides: ldconfig
%endif
Provides: rtld(GNU_HASH)
Obsoletes: glibc-profile < 2.4
# The dynamic linker supports DT_GNU_HASH
# Require libgcc in case some program calls pthread_cancel in its %%post
Requires(pre): basesystem, libgcc
# This is for building auxiliary programs like memusage, nscd
# For initial glibc bootstraps it can be commented out
BuildRequires: gd-devel libpng-devel zlib-devel texinfo
BuildRequires: audit-libs-devel >= 1.1.3, sed >= 3.95, libcap-devel, gettext, nss-devel
BuildRequires: python3-devel
BuildRequires: bison
BuildRequires: /bin/ps, /bin/kill, /bin/awk
# This is to ensure that __frame_state_for is exported by glibc
# will be compatible with egcs 1.x.y
BuildRequires: gcc >= 3.2
BuildRequires: dwz
%define enablekernel 3.2
Conflicts: kernel < %{enablekernel}
%ifarch i386
%define target_cpu i486
%else
%define target_cpu %{_target_cpu}
%endif

%define target %{_target_cpu}-vine-linux
%ifarch %{arm}
%define target %{_target_cpu}-vine-linuxeabi
%endif
%ifarch %{power64}
%define target ppc64-vine-linux
%endif

%ifarch %{multiarcharches}
# Need STT_IFUNC support
%ifarch ppc ppc64
BuildRequires: binutils >= 2.20.51.0.2
Conflicts: binutils < 2.20.51.0.2
%else
BuildRequires: binutils >= 2.19.51.0.10
Conflicts: binutils < 2.19.51.0.10
%endif
# Earlier releases have broken support for IRELATIVE relocations
Conflicts: prelink < 0.4.2
%else
# Need AS_NEEDED directive
# Need --hash-style=* support
BuildRequires: binutils >= 2.17.50.0.2-5
%endif
BuildRequires: gcc >= 3.2.1-5
%ifarch ppc s390 s390x
BuildRequires: gcc >= 4.1.0-0.17
%endif

# The testsuite builds static C++ binaries that require a static
# C++ runtime from libstdc++-static.
BuildRequires: libstdc++-static

BuildRequires: tzdata

#define __find_provides %{SOURCE10}
#define __find_requires %{SOURCE11}
%define _filter_GLIBC_PRIVATE 1

%description
The glibc package contains standard libraries which are used by
multiple programs on the system. In order to save disk space and
memory, as well as to make upgrading easier, common system code is
kept in one place and shared between programs. This particular package
contains the most important sets of shared libraries: the standard C
library and the standard math library. Without these two libraries, a
Linux system will not function.

%description -l ja
glibc パッケージはシステム上の複数のプログラムで使われる標準ライブラリを
ふくみます。ディスクスペースとメモリを節約したり、アップグレードを
用意にするために、共通のシステムコードは一つの場所におかれ、プログラム
間で共有されます。この部分的なパッケージはシェアドライブラリのかなり
重要なセットをふくみます: 標準 C ライブラリと標準数値ライブラリです。
この二つのライブラリ抜きでは、Linux システムは機能しません。


%if %{xenpackage}
%package xen
Summary: The GNU libc libraries (optimized for running under Xen)
Group: system
Requires: glibc = %{version}-%{release}, glibc-utils = %{version}-%{release}

%description xen
The standard glibc package is optimized for native kernels and does not
perform as well under the Xen hypervisor.  This package provides alternative
library binaries that will be selected instead when running under Xen.

Install glibc-xen if you might run your system under the Xen hypervisor.
%endif


%package devel
Summary: Object files for development using standard C libraries.
Summary(ja): 標準 C ライブラリで使われるオブジェクトファイル
Group: programming{?compat32_group}
Requires: %{name} = %{version}-%{release}
%if %{build_compat32}
Requires: glibc-devel >= %{version}-%{release}
%else
Requires(pre): glibc-headers
Requires: glibc-headers = %{version}-%{release}
%endif

%description devel
The glibc-devel package contains the object files necessary
for developing programs which use the standard C libraries (which are
used by nearly all programs).  If you are developing programs which
will use the standard C libraries, your system needs to have these
standard object files available in order to create the
executables.

Install glibc-devel if you are going to develop programs which will
use the standard C libraries.

%description devel -l ja
glibc-devel パッケージには (ほとんどすべてのプログラムで使われる)
標準 C ライブラリを使用したプログラムを開発するためのオブジェクトファイルが
含まれます。標準 C ライブラリを使用するプログラムを開発する場合には、
これらオブジェクトファイルを使用して実行ファイルを作成できます。

標準 C ライブラリを使用するプログラムを開発するなら glibc-devel
をインストールしてください。


%package static
Summary: C library static libraries for -static linking.
Summary(ja): -static リンクのための静的 C ライブラリ
Group: programming{?compat32_group}
Requires: %{name}-devel = %{version}-%{release}

%description static
The glibc-static package contains the C library static libraries
for -static linking.  You don't need these, unless you link statically,
which is highly discouraged.

%description static -l ja
glibc-static パッケージには -static リンクで使用する静的 C ライブラリが
入っています。
静的ライブラリが必要な場合でなければ、このパッケージをインストールする
ことは避けて下さい。


%package headers
Summary: Header files for development using standard C libraries.
Summary(ja): 標準 C ライブラリで使われるヘッダーファイル
Group: programming
Provides: %{name}-headers(%{_target_cpu})
%ifarch x86_64
# If both -m32 and -m64 is to be supported on AMD64, x86_64 glibc-headers
# have to be installed, not i586 ones.
Obsoletes: %{name}-headers < %{version}-%{release}
%endif
Requires(pre): kernel-headers
Requires: kernel-headers >= 2.2.1, %{name} = %{version}-%{release}
BuildRequires: kernel-headers >= 2.6.22

%description headers
The glibc-headers package contains the header files necessary
for developing programs which use the standard C libraries (which are
used by nearly all programs).  If you are developing programs which
will use the standard C libraries, your system needs to have these
standard header files available in order to create the
executables.

Install glibc-headers if you are going to develop programs which will
use the standard C libraries.

%description headers -l ja
glibc-headers パッケージには (ほとんどすべてのプログラムで使われる)
標準 C ライブラリを使用したプログラムを開発するためのヘッダーファイルが
含まれます。標準 C ライブラリを使用するプログラムを開発する場合には、
これら標準ヘッダーファイルを使用して実行ファイルを作成できます。

標準 C ライブラリを使用するプログラムを開発するなら glibc-headers
をインストールしてください。


%package common
Summary: Common binaries and locale data for glibc
Summary(ja): glibc 用共通バイナリとロケールデータ
Requires: %{name} = %{version}-%{release}
Requires: tzdata >= 2003a
Group: system

%description common
The glibc-common package includes common binaries for the GNU libc
libraries, as well as national language (locale) support.
This package include ja and en locale-archive.

%description common -l ja
glibc-common パッケージには GNU libc ライブラリ用の共用バイナリに
加えて、言語(ロケール)サポートや時間帯データベースが収められています。
このパッケージには日本語と英語のみの locale-archive が含まれます。


%package common-extra
Summary: Extra Locale data for glibc
Summary(ja): glibc 用ロケールデータ(日本語以外)
Group: system
Autoreq: false
Requires(pre): %{name}-common = %{version}-%{release}

%description common-extra
The glibc-common-extra package includes national language (locale)
support except for English and Japanese.

%description common-extra -l ja
glibc-common-extra パッケージには GNU libc ライブラリ用の英語と
日本語以外の言語(ロケール)が収められています。


%package locale-source
Summary: The sources for the locales of glibc
Summary(ja): glibc 用ロケールデータのソース
Group: system
Requires: %{name} = %{version}-%{release}
Requires: %{name}-common = %{version}-%{release}

%description locale-source
The sources for all locales provided in glibc. If you are building
custom locales you will most likely use these sources as the basis
for your new locale.


%package -n nscd
Summary: A Name Service Caching Daemon (nscd).
Summary(ja): ネームサービスキャッシングデーモン (nscd)
Group: system
Requires: %{name} = %{version}-%{release}
Requires: audit-libs >= 1.1.3
Requires(pre): /usr/sbin/useradd, coreutils
Requires(postun): /usr/sbin/userdel
%if %{with systemd}
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
%else
Requires(pre): /sbin/chkconfig
%endif

%description -n nscd
Nscd caches name service lookups and can dramatically improve
performance with NIS+, and may help with DNS as well.

%description -n nscd -l ja
nscd はネームサービス参照をキャッシュし、NIS+ のパフォーマンスを
劇的にに改善することができます。DNS のパフォーマンス向上にも同様に寄与します。


%package utils
Summary: Development utilities from GNU C library
Summary(ja): GNU C ライブラリの開発ユーティリティ
Group: programming,admin-tools
Requires: %{name} = %{version}-%{release}

%description utils
The glibc-utils package contains memusage, a memory usage profiler,
mtrace, a memory leak tracer and xtrace, a function call tracer
which can be helpful during program debugging.

If unsure if you need this, don't install this package.

%description utils -l ja
glibc-utils にはプログラムのデバッグに便利な以下のツールが収録されています：
memusage (メモリ使用量プロファイラ)、mtrace (メモリリークトレーサ)、
xtrace (関数呼出しトレーサ)。

これらが必要かどうか分からない場合は、インストールする必要はありません。


%debug_package


%prep
%autosetup -n %{glibcsrcdir} -p1

# Make benchmark scripts executable
chmod +x benchtests/scripts/*.py scripts/pylint

# Remove all files generated from patching.
find . -type f -size 0 -o -name "*.orig" -exec rm -f {} \;

# Ensure timestamps on configure files are current to prevent
# regenerating them.
touch `find . -name configure`

# Ensure *-kw.h files are current to prevent regenerating them.
touch locale/programs/*-kw.h

# Verify that our copy of localedata/SUPPORTED matches the glibc
# version.
#
# The separate file copy is used by the Lua parser above.
# Patches or new upstream versions may change the list of locales,
# which changes the set of langpacks we need to build.  Verify the
# differences then update the copy of SUPPORTED.  This approach has
# two purposes: (a) avoid spurious changes to the set of langpacks,
# and (b) the Lua snippet can use a fully patched-up version
# of the localedata/SUPPORTED file.
diff -u %{SOURCE11} localedata/SUPPORTED

cp -f %{SOURCE1000} ./


%build
# We build using the native system compilers.
GCC=gcc
GXX=g++

# Part of rpm_inherit_flags.  Is overridden below.
rpm_append_flag ()
{
    BuildFlags="$BuildFlags $*"
}

# Propagates the listed flags to rpm_append_flag if supplied by
# redhat-rpm-config.
BuildFlags="-O2 -g"
rpm_inherit_flags ()
{
	local reference=" $* "
	local flag
	for flag in $RPM_OPT_FLAGS $RPM_LD_FLAGS ; do
		if echo "$reference" | grep -q -F " $flag " ; then
			rpm_append_flag "$flag"
		fi
	done
}

# Propgate select compiler flags from redhat-rpm-config.  These flags
# are target-dependent, so we use only those which are specified in
# redhat-rpm-config.  We keep the -m32/-m32/-m64 flags to support
# multilib builds.
#
# Note: For building alternative run-times, care is required to avoid
# overriding the architecture flags which go into CC/CXX.  The flags
# below are passed in CFLAGS.

rpm_inherit_flags \
	"-Wp,-D_GLIBCXX_ASSERTIONS" \
	"-fasynchronous-unwind-tables" \
	"-fstack-clash-protection" \
	"-fno-omit-frame-pointer" \
	"-funwind-tables" \
	"-m31" \
	"-m32" \
	"-m64" \
	"-march=armv8-a+lse" \
	"-march=armv8.1-a" \
	"-march=haswell" \
	"-march=i686" \
	"-march=x86-64" \
	"-march=x86-64-v2" \
	"-march=x86-64-v3" \
	"-march=x86-64-v4" \
	"-march=z13" \
	"-march=z14" \
	"-march=z15" \
	"-march=zEC12" \
	"-mbranch-protection=standard" \
	"-mcpu=power10" \
	"-mcpu=power8" \
	"-mcpu=power9" \
	"-mfpmath=sse" \
	"-mno-omit-leaf-frame-pointer" \
	"-msse2" \
	"-mstackrealign" \
	"-mtune=generic" \
	"-mtune=power10" \
	"-mtune=power8" \
	"-mtune=power9" \
	"-mtune=z13" \
	"-mtune=z14" \
	"-mtune=z15" \
	"-mtune=zEC12" \
	"-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1" \

# libc_nonshared.a cannot be built with the default hardening flags
# because the glibc build system is incompatible with
# -D_FORTIFY_SOURCE.  The object files need to be marked as to be
# skipped in annobin annotations.  (The -specs= variant of activating
# annobin does not work here because of flag ordering issues.)
# See <https://bugzilla.redhat.com/show_bug.cgi?id=1668822>.
BuildFlagsNonshared="-Wa,--generate-missing-build-notes=yes"

# Special flag to enable annobin annotations for statically linked
# assembler code.  Needs to be passed to make; not preserved by
# configure.
%define glibc_make_flags_as ASFLAGS="-g -Wa,--generate-missing-build-notes=yes"
%define glibc_make_flags %{glibc_make_flags_as}

##############################################################################
# %%build - Generic options.
##############################################################################
EnableKernel="--enable-kernel=%{enablekernel}"

##############################################################################
# build()
#	Build glibc in `build-%{target}$1', passing the rest of the arguments
#	as CFLAGS to the build (not the same as configure CFLAGS). Several
#	global values are used to determine build flags, kernel version,
#	system tap support, etc.
##############################################################################
build()
{
	local builddir=build-%{target}${1:+-$1}
	${1+shift}
	local build_triplet=$(LANG=C gcc -v 2>&1 | grep "Target: " | cut -d " " -f 2)
	rm -rf $builddir
	mkdir $builddir
	pushd $builddir
	../configure \
		CC="$GCC" CFLAGS="$BuildFlags $*" \
		CXX="$GXX" CXXFLAGS="$BuildFlags $*" \
		--prefix=%{_prefix} \
		--with-headers=%{_prefix}/include $EnableKernel \
		--with-nonshared-cflags="$BuildFlagsNonshared" \
		--enable-bind-now \
		--build=${build_triplet} \
%if %{build_compat32}
		--host=%{target} \
		--target=%{target} \
%endif
		--enable-stack-protector=strong \
%ifarch %{pie_arches}
		--enable-static-pie \
%endif
		--enable-tunables \
%if 0
		--enable-systemtap \
%endif
		${core_with_options} \
%ifarch x86_64 %{ix86}
		--enable-cet \
%endif
%ifarch %{ix86}
		--disable-multi-arch \
%endif
%if %{without werror}
		--disable-werror \
%endif
		--disable-profile \
		--without-selinux \
		--disable-crypt ||
		{ cat config.log; false; }

	%make_build -O -r %{glibc_make_flags}
	popd
}

%if %{build_compat32}
GCC="gcc -m32"
GXX="g++ -m32"
%endif

# Save the used compiler and options into the file "Gcc" for use later
# by %%install.

echo "$GCC" > Gcc
echo "$GXX" > Gxx

# Default set of compiler options.
build


%install
rm -rf %{buildroot}
# The built glibc is installed into a subdirectory of $RPM_BUILD_ROOT.
# For a system glibc that subdirectory is "/" (the root of the filesystem).
# This is called a sysroot (system root) and can be changed if we have a
# distribution that supports multiple installed glibc versions.
%define glibc_sysroot $RPM_BUILD_ROOT

# Remove existing file lists.
find . -type f -name '*.filelist' -exec rm -rf {} \;

# Reload compiler and build options that were used during %%build.
GCC=`cat Gcc`
GXX=`cat Gxx`

# Build and install:
%make_build install_root=%{glibc_sysroot} install -C build-%{target}

# If we are not building an auxiliary arch then install all of the supported
# locales.
%ifnarch %{auxarches}
pushd build-%{target}
# Do not use a parallel make here because the hardlink optimization in
# localedef is not fully reproducible when running concurrently.
%make_build install_root=%{glibc_sysroot} \
	install-locale-files -C ../localedata objdir=`pwd`
popd
# Locale creation via install-locale-files does not group identical files
# via hardlinks, so we must group them ourselves.
hardlink -c %{glibc_sysroot}/usr/lib/locale
%endif

# install_different:
#	Install all core libraries into DESTDIR/SUBDIR. Either the file is
#	installed as a copy or a symlink to the default install (if it is the
#	same). The path SUBDIR_UP is the prefix used to go from
#	DESTDIR/SUBDIR to the default installed libraries e.g.
#	ln -s SUBDIR_UP/foo.so DESTDIR/SUBDIR/foo.so.
#	When you call this function it is expected that you are in the root
#	of the build directory, and that the default build directory is:
#	"../build-%{target}" (relatively).
#	The primary use of this function is to install alternate runtimes
#	into the build directory and avoid duplicating this code for each
#	runtime.
install_different()
{
	local lib libbase libbaseso dlib
	local destdir="$1"
	local subdir="$2"
	local subdir_up="$3"
	local libdestdir="$destdir/$subdir"
	# All three arguments must be non-zero paths.
	if ! [ "$destdir" \
	       -a "$subdir" \
	       -a "$subdir_up" ]; then
		echo "One of the arguments to install_different was emtpy."
		exit 1
	fi
	# Create the destination directory and the multilib directory.
	mkdir -p "$destdir"
	mkdir -p "$libdestdir"
	# Walk all of the libraries we installed...
	for lib in libc math/libm nptl/libpthread rt/librt nptl_db/libthread_db
	do
		libbase=${lib#*/}
		# Take care that `libbaseso' has a * that needs expanding so
		# take care with quoting.
		libbaseso=$(basename %{glibc_sysroot}/%{_lib}/${libbase}-*.so)
		# Only install if different from default build library.
		if cmp -s ${lib}.so ../build-%{target}/${lib}.so; then
			ln -sf "$subdir_up"/$libbaseso $libdestdir/$libbaseso
		else
			cp -a ${lib}.so $libdestdir/$libbaseso
		fi
		dlib=$libdestdir/$(basename %{glibc_sysroot}/%{_lib}/${libbase}.so.*)
		ln -sf $libbaseso $dlib
	done
}

##############################################################################
# Remove the files we don't want to distribute
##############################################################################

# Remove the libNoVersion files.
# XXX: This looks like a bug in glibc that accidentally installed these
#      wrong files. We probably don't need this today.
rm -f %{glibc_sysroot}/%{_libdir}/libNoVersion*
rm -f %{glibc_sysroot}/%{_lib}/libNoVersion*

# Remove the old nss modules.
rm -f %{glibc_sysroot}/%{_lib}/libnss1-*
rm -f %{glibc_sysroot}/%{_lib}/libnss-*.so.1

# This statically linked binary is no longer necessary in a world where
# the default Fedora install uses an initramfs, and further we have rpm-ostree
# which captures the whole userspace FS tree.
# Further, see https://github.com/projectatomic/rpm-ostree/pull/1173#issuecomment-355014583
rm -f %{glibc_sysroot}/{usr/,}sbin/sln

######################################################################
# Run ldconfig to create all the symbolic links we need
######################################################################

# Note: This has to happen before creating /etc/ld.so.conf.

mkdir -p %{glibc_sysroot}/var/cache/ldconfig
truncate -s 0 %{glibc_sysroot}/var/cache/ldconfig/aux-cache

# ldconfig is statically linked, so we can use the new version.
%{glibc_sysroot}/sbin/ldconfig -N -r %{glibc_sysroot}

##############################################################################
# Install info files
##############################################################################

%ifnarch %{auxarches}
%if %{with docs}
# Move the info files if glibc installed them into the wrong location.
if [ -d %{glibc_sysroot}%{_prefix}/info -a "%{_infodir}" != "%{_prefix}/info" ]; then
  mkdir -p %{glibc_sysroot}%{_infodir}
  mv -f %{glibc_sysroot}%{_prefix}/info/* %{glibc_sysroot}%{_infodir}
  rm -rf %{glibc_sysroot}%{_prefix}/info
fi

# Compress all of the info files.
gzip -9nvf %{glibc_sysroot}%{_infodir}/libc*

%else
rm -f %{glibc_sysroot}%{_infodir}/dir
rm -f %{glibc_sysroot}%{_infodir}/libc.info*
%endif
%else
rm -f %{glibc_sysroot}%{_infodir}/dir
rm -f %{glibc_sysroot}%{_infodir}/libc.info*
%endif

##############################################################################
# Create locale sub-package file lists
##############################################################################

rm -f %{glibc_sysroot}/etc/localtime
cp -f %{_datadir}/zoneinfo/Asia/Tokyo %{glibc_sysroot}/etc/localtime

%ifnarch %{auxarches}
olddir=`pwd`
pushd %{glibc_sysroot}%{_prefix}/lib/locale
rm -f locale-archive
# Intentionally we do not pass --alias-file=, aliases will be added
# by build-locale-archive.
$olddir/build-%{target}/elf/ld.so \
        --library-path $olddir/build-%{target}/ \
        $olddir/build-%{target}/locale/localedef \
        --alias-file=$olddir/intl/locale.alias \
        --prefix %{glibc_sysroot} --add-to-archive \
        eo syr *_*
# Setup the locale-archive template for use by glibc-all-langpacks.
mv locale-archive{,-extra.tmpl}
$olddir/build-%{target}/elf/ld.so \
        --library-path $olddir/build-%{target}/ \
        $olddir/build-%{target}/locale/localedef \
        --alias-file=$olddir/intl/locale.alias \
        --prefix %{glibc_sysroot} --add-to-archive \
        ja_JP* en_US*
mv locale-archive{,.tmpl}
cp -a locale-archive{.tmpl,-ja.tmpl}
# Create the file lists for the language specific sub-packages:
for i in eo syr *_*
do
    lang=${i%%_*}
#    if [ ! -e langpack-${lang}.filelist ]; then
#        echo "%dir %{_prefix}/lib/locale" >> locales.filelist
#    fi
    echo "%dir  %{_prefix}/lib/locale/$i" >> locales.filelist
    echo "%{_prefix}/lib/locale/$i/*" >> locales.filelist
done
popd
pushd %{glibc_sysroot}%{_prefix}/share/locale
for i in */LC_MESSAGES/libc.mo
do
    locale=${i%%%%/*}
    lang=${locale%%%%_*}
    echo "%lang($lang) %{_prefix}/share/locale/${i}" \
         >> %{glibc_sysroot}%{_prefix}/lib/locale/locales.filelist
done
popd
mv  %{glibc_sysroot}%{_prefix}/lib/locale/*.filelist .
%endif

##############################################################################
# Install configuration files for services
##############################################################################

install -p -m 644 %{SOURCE7} %{glibc_sysroot}/etc/nsswitch.conf

%ifnarch %{auxarches}
# This is for ncsd - in glibc 2.2
install -m 644 nscd/nscd.conf %{glibc_sysroot}/etc
%if %{with systemd}
mkdir -p %{glibc_sysroot}%{_tmpfilesdir}
install -m 644 %{SOURCE4} %{buildroot}%{_tmpfilesdir}
mkdir -p %{glibc_sysroot}%{_unitdir}
install -m 644 nscd/nscd.service %{glibc_sysroot}%{_unitdir}/
%else
mkdir -p %{glibc_sysroot}/etc/rc.d/init.d
install -m 755 nscd/nscd.init %{glibc_sysroot}/etc/rc.d/init.d/nscd
%endif
%endif

# Include ld.so.conf
echo 'include ld.so.conf.d/*.conf' > %{glibc_sysroot}/etc/ld.so.conf
truncate -s 0 %{glibc_sysroot}/etc/ld.so.cache
chmod 644 %{glibc_sysroot}/etc/ld.so.conf
mkdir -p %{glibc_sysroot}/etc/ld.so.conf.d
%ifnarch %{auxarches}
mkdir -p %{glibc_sysroot}/etc/sysconfig
truncate -s 0 %{glibc_sysroot}/etc/sysconfig/nscd
truncate -s 0 %{glibc_sysroot}/etc/gai.conf
%endif

# Include %{_libdir}/gconv/gconv-modules.cache
truncate -s 0 %{glibc_sysroot}%{_libdir}/gconv/gconv-modules.cache
chmod 644 %{glibc_sysroot}%{_libdir}/gconv/gconv-modules.cache

# Remove any zoneinfo files; they are maintained by tzdata.
rm -rf %{glibc_sysroot}%{_prefix}/share/zoneinfo

# Make sure %config files have the same timestamp across multilib packages.
#
# XXX: Ideally ld.so.conf should have the timestamp of the spec file, but there
# doesn't seem to be any macro to give us that.  So we do the next best thing,
# which is to at least keep the timestamp consistent.  The choice of using
# glibc_post_upgrade.c is arbitrary.
touch -r %{SOURCE0} %{glibc_sysroot}/etc/ld.so.conf
touch -r inet/etc.rpc %{glibc_sysroot}/etc/rpc

%ifnarch %{auxarches}
pushd build-%{target}
$GCC -Os -g -static -o build-locale-archive %{SOURCE1} \
	../build-%{target}/locale/locarchive.o \
	../build-%{target}/locale/md5.o \
	../build-%{target}/locale/record-status.o \
	-I. -DDATADIR=\"%{_datadir}\" -DPREFIX=\"%{_prefix}\" \
	-L../build-%{target} \
	-B../build-%{target}/csu/ -lc -lc_nonshared
install -m 700 build-locale-archive %{glibc_sysroot}%{_prefix}/sbin/build-locale-archive
popd
%endif

# Lastly copy some additional documentation for the packages.
rm -rf documentation
mkdir documentation
cp timezone/README documentation/README.timezone
cp posix/gai.conf documentation/

%if %{with benchtests}
# Build benchmark binaries.  Ignore the output of the benchmark runs.
pushd build-%{target}
make BENCH_DURATION=1 bench-build
popd

# Copy over benchmark binaries.
mkdir -p %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests
cp $(find build-%{target}/benchtests -type f -executable) %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
# ... and the makefile.
for b in %{SOURCE9} %{SOURCE10}; do
	cp $b %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
done
# .. and finally, the comparison scripts.
cp benchtests/scripts/benchout.schema.json %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
cp benchtests/scripts/compare_bench.py %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
cp benchtests/scripts/import_bench.py %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
cp benchtests/scripts/validate_benchout.py %{glibc_sysroot}%{_prefix}/libexec/glibc-benchtests/
%endif

# The #line directives gperf generates do not give the proper
# file name relative to the build directory.
pushd locale
ln -sf programs/*.gperf .
popd
pushd iconv
ln -sf ../locale/programs/charmap-kw.gperf .
popd

%if %{with docs}
# Remove the `dir' info-heirarchy file which will be maintained
# by the system as it adds info files to the install.
rm -f %{glibc_sysroot}%{_infodir}/dir
%endif

%ifnarch %{auxarches}
truncate -s 0 %{glibc_sysroot}/%{_prefix}/lib/locale/locale-archive
mkdir -p %{glibc_sysroot}/var/{db,run}/nscd
touch %{glibc_sysroot}/var/{db,run}/nscd/{passwd,group,hosts,services}
touch %{glibc_sysroot}/var/run/nscd/{socket,nscd.pid}
%endif

# Move libpcprofile.so and libmemusage.so into the proper library directory.
# They can be moved without any real consequences because users would not use
# them directly.
mkdir -p %{glibc_sysroot}%{_libdir}
mv -f %{glibc_sysroot}/%{_lib}/lib{pcprofile,memusage}.so \
	%{glibc_sysroot}%{_libdir}

# Strip all of the installed object files.
strip -g %{glibc_sysroot}%{_libdir}/*.o

%ifnarch %{auxarches}
# The xtrace and memusage scripts have hard-coded paths that need to be
# translated to a correct set of paths using the $LIB token which is
# dynamically translated by ld.so as the default lib directory.
for i in %{glibc_sysroot}%{_prefix}/bin/{xtrace,memusage}; do
%if %{with bootstrap}
  test -w $i || continue
%endif
  sed -e 's~=/%{_lib}/libpcprofile.so~=%{_libdir}/libpcprofile.so~' \
      -e 's~=/%{_lib}/libmemusage.so~=%{_libdir}/libmemusage.so~' \
      -e 's~='\''/\\\$LIB/libpcprofile.so~='\''%{_prefix}/\\$LIB/libpcprofile.so~' \
      -e 's~='\''/\\\$LIB/libmemusage.so~='\''%{_prefix}/\\$LIB/libmemusage.so~' \
      -i $i
done
%endif

##############################################################################
# Build an empty libpthread_nonshared.a for compatiliby with applications
# that have old linker scripts that reference this file. We ship this only
# in compat-libpthread-nonshared sub-package.
##############################################################################
ar cr %{glibc_sysroot}%{_prefix}/%{_lib}/libpthread_nonshared.a

##############################################################################
# Beyond this point in the install process we no longer modify the set of
# installed files, with one exception, for auxarches we cleanup the file list
# at the end and remove files which we don't intend to ship. We need the file
# list to effect a proper cleanup, and so it happens last.
##############################################################################

##############################################################################
# Build the file lists used for describing the package and subpackages.
##############################################################################
# There are several main file lists (and many more for
# the langpack sub-packages (langpack-${lang}.filelist)):
# * master.filelist
#	- Master file list from which all other lists are built.
# * glibc.filelist
#	- Files for the glibc packages.
# * common.filelist
#	- Flies for the common subpackage.
# * utils.filelist
#	- Files for the utils subpackage.
# * nscd.filelist
#	- Files for the nscd subpackage.
# * devel.filelist
#	- Files for the devel subpackage.
# * headers.filelist
#	- Files for the headers subpackage.
# * static.filelist
#	- Files for the static subpackage.
# * libnsl.filelist
#       - Files for the libnsl subpackage
# * nss_db.filelist
# * nss_hesiod.filelist
#       - File lists for nss_* NSS module subpackages.
# * nss-devel.filelist
#       - File list with the .so symbolic links for NSS packages.
# * compat-libpthread-nonshared.filelist.
#	- File list for compat-libpthread-nonshared subpackage.
#

# Create the main file lists. This way we can append to any one of them later
# wihtout having to create it. Note these are removed at the start of the
# install phase.
touch master.filelist
touch glibc.filelist
touch common.filelist
touch utils.filelist
touch nscd.filelist
touch devel.filelist
touch headers.filelist
touch static.filelist
touch libnsl.filelist
touch nss_db.filelist
touch nss_hesiod.filelist
touch nss-devel.filelist
touch compat-libpthread-nonshared.filelist

###############################################################################
# Master file list, excluding a few things.
###############################################################################
{
  # List all files or links that we have created during install.
  # Files with 'etc' are configuration files, likewise 'gconv-modules'
  # and 'gconv-modules.cache' are caches, and we exclude them.
  find %{glibc_sysroot} \( -type f -o -type l \) \
       \( \
	 -name etc -printf "%%%%config " -o \
	 -name gconv-modules \
	 -printf "%%%%verify(not md5 size mtime) %%%%config(noreplace) " -o \
	 -name gconv-modules.cache \
	 -printf "%%%%verify(not md5 size mtime) " \
	 , \
	 ! -path "*/lib/debug/*" -printf "/%%P\n" \)
  # List all directories with a %%dir prefix.  We omit the info directory and
  # all directories in (and including) /usr/share/locale.
  find %{glibc_sysroot} -type d \
       \( -path '*%{_prefix}/share/locale' -prune -o \
       \( -path '*%{_prefix}/share/*' \
%if %{with docs}
	! -path '*%{_infodir}' -o \
%endif
	  -path "*%{_prefix}/include/*" \
       \) -printf "%%%%dir /%%P\n" \)
} | {
  # Also remove the *.mo entries.  We will add them to the
  # language specific sub-packages.
  # libnss_ files go into subpackages related to NSS modules.
  # and .*/share/i18n/charmaps/.*), they go into the sub-package
  # "locale-source":
  sed -e '\,.*/share/locale/\([^/_]\+\).*/LC_MESSAGES/.*\.mo,d' \
      -e '\,.*/share/i18n/locales/.*,d' \
      -e '\,.*/share/i18n/charmaps/.*,d' \
      -e '\,.*/etc/\(localtime\|nsswitch.conf\|ld\.so\.conf\|ld\.so\.cache\|default\|rpc\|gai\.conf\),d' \
      -e '\,.*/%{_libdir}/lib\(pcprofile\|memusage\)\.so,d' \
      -e '\,.*/bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d'
} | sort > master.filelist

# The master file list is now used by each subpackage to list their own
# files. We go through each package and subpackage now and create their lists.
# Each subpackage picks the files from the master list that they need.
# The order of the subpackage list generation does not matter.

# Make the master file list read-only after this point to avoid accidental
# modification.
chmod 0444 master.filelist

###############################################################################
# glibc
###############################################################################

# Add all files with the following exceptions:
# - The info files '%{_infodir}/dir'
# - The partial (lib*_p.a) static libraries, include files.
# - The static files, objects, unversioned DSOs, and nscd.
# - The bin, locale, some sbin, and share.
#   - The use of [^gi] is meant to exclude all files except glibc_post_upgrade,
#     and iconvconfig, which we want in the main packages.
# - All the libnss files (we add back the ones we want later).
# - All bench test binaries.
# - The aux-cache, since it's handled specially in the files section.
# - The build-locale-archive binary since it's in the common package.
cat master.filelist \
	| grep -v \
	-e '%{_infodir}' \
	-e '%{_libdir}/lib.*_p.a' \
	-e '%{_prefix}/include' \
	-e '%{_libdir}/lib.*\.a' \
        -e '%{_libdir}/.*\.o' \
	-e '%{_libdir}/lib.*\.so' \
	-e 'nscd' \
	-e '%{_prefix}/bin' \
	-e '%{_prefix}/lib/locale' \
	-e '%{_prefix}/sbin/[^gi]' \
	-e '%{_prefix}/share' \
	-e '/var/db/Makefile' \
	-e '/libnss_.*\.so[0-9.]*$' \
	-e '/libnsl' \
	-e 'glibc-benchtests' \
	-e 'aux-cache' \
	-e 'build-locale-archive' \
	-e '/sbin/ldconfig' \
	> glibc.filelist

# Add specific files:
# - The nss_files, nss_compat, and nss_db files.
# - The libmemusage.so and libpcprofile.so used by utils.
for module in compat files db dns hesiod; do
    cat master.filelist \
	| grep -E \
	-e "/libnss_$module(\.so\.[0-9.]+|-[0-9.]+\.so)$" \
	>> glibc.filelist
done
grep -e "libmemusage.so" -e "libpcprofile.so" master.filelist >> glibc.filelist

###############################################################################
# glibc-devel
###############################################################################

%if %{with docs}
# Put the info files into the devel file list, but exclude the generated dir.
grep '%{_infodir}' master.filelist | grep -v '%{_infodir}/dir' > devel.filelist
%endif

# Put some static files into the devel package.
grep '%{_libdir}/lib.*\.a' master.filelist \
  | grep '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\|pthread\|dl\|rt\|util\|anl\)\.a$' \
  >> devel.filelist

# Put all of the object files and *.so (not the versioned ones) into the
# devel package.
grep '%{_libdir}/.*\.o' < master.filelist >> devel.filelist
grep '%{_libdir}/lib.*\.so' < master.filelist >> devel.filelist
# The exceptions are:
# - libmemusage.so and libpcprofile.so in glibc used by utils.
# - libnss_*.so which are in nss-devel.
sed -i -e '\,libmemusage.so,d' \
	-e '\,libpcprofile.so,d' \
	-e '\,/libnss_[a-z]*\.so$,d' \
	devel.filelist

###############################################################################
# glibc-headers
###############################################################################

# The glibc-headers package includes only common files which are identical
# across all multilib packages. We must keep gnu/stubs.h and gnu/lib-names.h
# in the glibc-headers package, but the -32, -64, -64-v1, and -64-v2 versions
# go into the development packages.
grep '%{_prefix}/include/gnu/stubs-.*\.h$' < master.filelist >> devel.filelist || :
grep '%{_prefix}/include/gnu/lib-names-.*\.h$' < master.filelist >> devel.filelist || :
# Put the include files into headers file list.
grep '%{_prefix}/include' < master.filelist \
  | egrep -v '%{_prefix}/include/gnu/stubs-.*\.h$' \
  | egrep -v '%{_prefix}/include/gnu/lib-names-.*\.h$' \
  > headers.filelist

###############################################################################
# glibc-static
###############################################################################

# Put the rest of the static files into the static package.
grep '%{_libdir}/lib.*\.a' < master.filelist \
  | grep -v '/lib\(\(c\|pthread\|nldbl\|mvec\)_nonshared\|g\|ieee\|mcheck\|pthread\|dl\|rt\|util\|anl\)\.a$' \
  > static.filelist

###############################################################################
# glibc-common
###############################################################################

# All of the bin and certain sbin files go into the common package except
# glibc_post_upgrade.* and iconvconfig which need to go in glibc. Likewise
# nscd is excluded because it goes in nscd.
grep '%{_prefix}/bin' master.filelist >> common.filelist
grep '%{_prefix}/sbin/[^gi]' master.filelist \
	| grep -v 'nscd' >> common.filelist
# All of the files under share go into the common package since they should be
# multilib-independent.
# Exceptions:
# - The actual share directory, not owned by us.
# - The info files which go in devel, and the info directory.
grep '%{_prefix}/share' master.filelist \
	| grep -v \
	-e '%{_prefix}/share/info/libc.info.*' \
	-e '%%dir %{_prefix}/share/info' \
	-e '%%dir %{_prefix}/share' \
	>> common.filelist

%ifnarch %{auxarches}
# Add the binary to build locales to the common subpackage.
#echo '%{_prefix}/sbin/build-locale-archive' >> common.filelist
grep -e "/en_US/" -e "/ja_JP" -e "/ja/" locales.filelist >> common.filelist
grep -v -e "/en_US/" -e "/ja_JP" -e "/ja/" locales.filelist >> common-extra.filelist
%endif

###############################################################################
# nscd
###############################################################################

# The nscd binary must go into the nscd subpackage.
echo '%{_prefix}/sbin/nscd' > nscd.filelist

###############################################################################
# glibc-utils
###############################################################################

# Add the utils scripts and programs to the utils subpackage.
cat > utils.filelist <<EOF
%if %{without bootstrap}
%{_prefix}/bin/memusage
%{_prefix}/bin/memusagestat
%endif
%{_prefix}/bin/mtrace
%{_prefix}/bin/pcprofiledump
%{_prefix}/bin/xtrace
EOF

###############################################################################
# nss_db, nss_hesiod
###############################################################################

# Move the NSS-related files to the NSS subpackages.  Be careful not
# to pick up .debug files, and the -devel symbolic links.
for module in db hesiod; do
  grep -E "/libnss_$module(\.so\.[0-9.]+|-[0-9.]+\.so)$" \
    master.filelist > nss_$module.filelist
done

###############################################################################
# nss-devel
###############################################################################

# Symlinks go into the nss-devel package (instead of the main devel
# package).
grep '/libnss_[a-z]*\.so$' master.filelist > nss-devel.filelist
grep '/libnss_[a-z]*\.so$' master.filelist >> devel.filelist

###############################################################################
# libnsl
###############################################################################

# Prepare the libnsl-related file lists.
grep -E '/libnsl\.so\.[0-9]+$' master.filelist > libnsl.filelist
test $(wc -l < libnsl.filelist) -eq 1

###############################################################################
# glibc-benchtests
###############################################################################
%if %{with benchtests}

# List of benchmarks.
find build-%{target}/benchtests -type f -executable | while read b; do
	echo "%{_prefix}/libexec/glibc-benchtests/$(basename $b)"
done >> benchtests.filelist
# ... and the makefile.
for b in %{SOURCE9} %{SOURCE10}; do
	echo "%{_prefix}/libexec/glibc-benchtests/$(basename $b)" >> benchtests.filelist
done
# ... and finally, the comparison scripts.
echo "%{_prefix}/libexec/glibc-benchtests/benchout.schema.json" >> benchtests.filelist
echo "%{_prefix}/libexec/glibc-benchtests/compare_bench.py*" >> benchtests.filelist
echo "%{_prefix}/libexec/glibc-benchtests/import_bench.py*" >> benchtests.filelist
echo "%{_prefix}/libexec/glibc-benchtests/validate_benchout.py*" >> benchtests.filelist
%endif

###############################################################################
# compat-libpthread-nonshared
###############################################################################
echo "%{_libdir}/libpthread_nonshared.a" >> compat-libpthread-nonshared.filelist

%if %{build_compat32}
###############################################################################
# compat32-glibc
###############################################################################

cat glibc.filelist \
	| grep \
	-e '/lib/' \
	-e '/libexec/' \
	> compat32-glibc.filelist

cat devel.filelist \
	| grep \
	-e '/lib/' \
	-e '/include/' \
	> compat32-devel.filelist

cat static.filelist \
	| grep \
	-e '/lib/' \
	> compat32-static.filelist

rm -rf %{glibc_sysroot}/{etc,lib64,sbin,var}
rm -rf %{glibc_sysroot}/usr/{bin,lib64,sbin,share}
rm -f %{glibc_sysroot}/usr/include/gnu/{lib-names,libc-version,stubs}.h
find %{glibc_sysroot}/usr/include -type f | grep -v /gnu/ | xargs rm -f
%endif


%check
%if %{with testsuite}

# Run the glibc tests. If any tests fail to build we exit %check with
# an error, otherwise we print the test failure list and the failed
# test output and continue.  Write to standard error to avoid
# synchronization issues with make and shell tracing output if
# standard output and standard error are different pipes.
run_tests () {
  # This hides a test suite build failure, which should be fatal.  We
  # check "Summary of test results:" below to verify that all tests
  # were built and run.
  make %{?_smp_mflags} -O check |& tee rpmbuild.check.log >&2
  test -n tests.sum
  if ! grep -q '^Summary of test results:$' rpmbuild.check.log ; then
    echo "FAIL: test suite build of target: $(basename "$(pwd)")" >& 2
    exit 1
  fi
  set +x
  grep -v ^PASS: tests.sum > rpmbuild.tests.sum.not-passing || true
  if test -n rpmbuild.tests.sum.not-passing ; then
    echo ===================FAILED TESTS===================== >&2
    echo "Target: $(basename "$(pwd)")" >& 2
    cat rpmbuild.tests.sum.not-passing >&2
    while read failed_code failed_test ; do
      for suffix in out test-result ; do
        if test -e "$failed_test.$suffix"; then
	  echo >&2
          echo "=====$failed_code $failed_test.$suffix=====" >&2
          cat -- "$failed_test.$suffix" >&2
	  echo >&2
        fi
      done
    done <rpmbuild.tests.sum.not-passing
  fi

  # Unconditonally dump differences in the system call list.
  echo "* System call consistency checks:" >&2
  cat misc/tst-syscall-list.out >&2
  set -x
}

# Increase timeouts
export TIMEOUTFACTOR=16
parent=$$
echo ====================TESTING=========================

# Default libraries.
pushd build-%{target}
run_tests
popd


echo ====================TESTING END=====================
PLTCMD='/^Relocation section .*\(\.rela\?\.plt\|\.rela\.IA_64\.pltoff\)/,/^$/p'
echo ====================PLT RELOCS LD.SO================
readelf -Wr %{glibc_sysroot}/%{_lib}/ld-*.so | sed -n -e "$PLTCMD"
echo ====================PLT RELOCS LIBC.SO==============
readelf -Wr %{glibc_sysroot}/%{_lib}/libc-*.so | sed -n -e "$PLTCMD"
echo ====================PLT RELOCS END==================

# Finally, check if valgrind runs with the new glibc.
# We want to fail building if valgrind is not able to run with this glibc so
# that we can then coordinate with valgrind to get it fixed before we update
# glibc.
pushd build-%{target}

# Show the auxiliary vector as seen by the new library
# (even if we do not perform the valgrind test).
LD_SHOW_AUXV=1 elf/ld.so --library-path .:elf:nptl:dlfcn /bin/true

%if %{with valgrind}
elf/ld.so --library-path .:elf:nptl:dlfcn \
	/usr/bin/valgrind --error-exitcode=1 \
	elf/ld.so --library-path .:elf:nptl:dlfcn /usr/bin/true
%endif
popd

%endif # %{run_glibc_tests}


######################################################################
# File triggers to do ldconfig calls automatically (see rhbz#1380878)
######################################################################

# File triggers for when libraries are added or removed in standard
# paths.
%transfiletriggerin common -P 2000000 -- /lib /usr/lib /lib64 /usr/lib64
/sbin/ldconfig
%end

%transfiletriggerpostun common -P 2000000 -- /lib /usr/lib /lib64 /usr/lib64
/sbin/ldconfig
%end

%pre -p <lua>
-- Check that the running kernel is new enough
required = '%{enablekernel}'
rel = posix.uname("%r")
if rpm.vercmp(rel, required) < 0 then
  error("FATAL: kernel too old", 0)
end

%post -p <lua>
-- We use lua's posix.exec because there may be no shell that we can
-- run during glibc upgrade.  We used to implement much of %%post as a
-- C program, but from an overall maintenance perspective the lua in
-- the spec file was simpler and safer given the operations required.
-- All lua code will be ignored by rpm-ostree; see:
-- https://github.com/projectatomic/rpm-ostree/pull/1869
-- If we add new lua actions to the %%post code we should coordinate
-- with rpm-ostree and ensure that their glibc install is functional.
function post_exec (program, ...)
  local pid = posix.fork ()
  if pid == 0 then
    assert (posix.exec (program, ...))
  elseif pid > 0 then
    posix.wait (pid)
  end
end

-- (1) Remove multilib libraries from previous installs.
-- In order to support in-place upgrades, we must immediately remove
-- obsolete platform directories after installing a new glibc
-- version.  RPM only deletes files removed by updates near the end
-- of the transaction.  If we did not remove the obsolete platform
-- directories here, they may be preferred by the dynamic linker
-- during the execution of subsequent RPM scriptlets, likely
-- resulting in process startup failures.

-- Full set of libraries glibc may install.
install_libs = { "anl", "BrokenLocale", "c", "dl", "m", "mvec",
		 "nss_compat", "nss_db", "nss_dns", "nss_files",
		 "nss_hesiod", "pthread", "resolv", "rt", "SegFault",
		 "thread_db", "util" }

-- We are going to remove these libraries. Generally speaking we remove
-- all core libraries in the multilib directory.
-- We employ a tight match where X.Y is in [2.0,9.9*], so we would 
-- match "libc-2.0.so" and so on up to "libc-9.9*".
remove_regexps = {}
for i = 1, #install_libs do
  -- Versioned install name.
  remove_regexps[#remove_regexps + 1] = ("lib" .. install_libs[i]
                                         .. "%%-[2-9]%%.[0-9]+%%.so$")
  -- Unversioned install name.
  remove_regexps[#remove_regexps + 1] = ("lib" .. install_libs[i]
                                         .. "%%.so%%.[0-9]+$")
end

-- Two exceptions:
remove_regexps[#install_libs + 1] = "libthread_db%%-1%%.0%%.so"
remove_regexps[#install_libs + 2] = "libSegFault%%.so"

-- We are going to search these directories.
local remove_dirs = { "%{_libdir}/i686",
		      "%{_libdir}/i686/nosegneg",
		      "%{_libdir}/power6",
		      "%{_libdir}/power7",
		      "%{_libdir}/power8",
		      "%{_libdir}/power9" }

-- Add all the subdirectories of the glibc-hwcaps subdirectory.
repeat
  local iter = posix.files("%{_libdir}/glibc-hwcaps")
  if iter ~= nil then
    for entry in iter do
      if entry ~= "." and entry ~= ".." then
        local path = "%{_libdir}/glibc-hwcaps/" .. entry
        if posix.access(path .. "/.", "x") then
          remove_dirs[#remove_dirs + 1] = path
        end
      end
    end
  end
until true

-- Walk all the directories with files we need to remove...
for _, rdir in ipairs (remove_dirs) do
  if posix.access (rdir) then
    -- If the directory exists we look at all the files...
    local remove_files = posix.files (rdir)
    for rfile in remove_files do
      for _, rregexp in ipairs (remove_regexps) do
	-- Does it match the regexp?
	local dso = string.match (rfile, rregexp)
        if (dso ~= nil) then
	  -- Removing file...
	  os.remove (rdir .. '/' .. rfile)
	end
      end
    end
  end
end

-- (2) Update /etc/ld.so.conf
-- Next we update /etc/ld.so.conf to ensure that it starts with
-- a literal "include ld.so.conf.d/*.conf".

local ldsoconf = "/etc/ld.so.conf"
local ldsoconf_tmp = "/etc/glibc_post_upgrade.ld.so.conf"

if posix.access (ldsoconf) then

  -- We must have a "include ld.so.conf.d/*.conf" line.
  local have_include = false
  for line in io.lines (ldsoconf) do
    -- This must match, and we don't ignore whitespace.
    if string.match (line, "^include ld.so.conf.d/%%*%%.conf$") ~= nil then
      have_include = true
    end
  end

  if not have_include then
    -- Insert "include ld.so.conf.d/*.conf" line at the start of the
    -- file. We only support one of these post upgrades running at
    -- a time (temporary file name is fixed).
    local tmp_fd = io.open (ldsoconf_tmp, "w")
    if tmp_fd ~= nil then
      tmp_fd:write ("include ld.so.conf.d/*.conf\n")
      for line in io.lines (ldsoconf) do
        tmp_fd:write (line .. "\n")
      end
      tmp_fd:close ()
      local res = os.rename (ldsoconf_tmp, ldsoconf)
      if res == nil then
        io.stdout:write ("Error: Unable to update configuration file (rename).\n")
      end
    else
      io.stdout:write ("Error: Unable to update configuration file (open).\n")
    end
  end
end

-- (3) Rebuild ld.so.cache early.
-- If the format of the cache changes then we need to rebuild
-- the cache early to avoid any problems running binaries with
-- the new glibc.

-- Note: We use _prefix because Fedora's UsrMove says so.
post_exec ("/sbin/ldconfig")

-- (4) Update gconv modules cache.
-- If the /usr/lib/gconv/gconv-modules.cache exists, then update it
-- with the latest set of modules that were just installed.
-- We assume that the cache is in _libdir/gconv and called
-- "gconv-modules.cache".

local iconv_dir = "%{_libdir}/gconv"
local iconv_cache = iconv_dir .. "/gconv-modules.cache"
if (posix.utime (iconv_cache) == 0) then
  post_exec ("%{_prefix}/sbin/iconvconfig",
	     "-o", iconv_cache,
	     "--nostdlib",
	     iconv_dir)
else
  io.stdout:write ("Error: Missing " .. iconv_cache .. " file.\n")
end

%triggerin common -p <lua> -- glibc
if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
  pid = posix.fork()
  if pid == 0 then
    posix.exec("%{_prefix}/sbin/build-locale-archive")
  elseif pid > 0 then
    posix.wait(pid)
  end
end

%post common -p <lua>
if posix.access("/etc/ld.so.cache") then
  if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
    pid = posix.fork()
    if pid == 0 then
      posix.exec("%{_prefix}/sbin/build-locale-archive")
    elseif pid > 0 then
      posix.wait(pid)
    end
  end
end

%if %{without systemd}
%triggerin common -p <lua> -- tzdata
function update (filename, new_data)
  local fd = io.open(filename)
  if not fd then return end
  local data = fd:read("*a")
  fd:close()
  if not data then return end
  -- Don't update the file unnecessarily.
  if data == new_data then return end
  local tempfilename = filename .. ".tzupdate"
  fd = io.open(tempfilename, "w")
  if not fd then return end
  fd:write(new_data)
  fd:close()
  posix.chmod(tempfilename, 0644)
  if not os.rename(tempfilename, filename) then
    os.remove(tempfilename)
  end
end
fd = io.open("/etc/sysconfig/clock")
if not fd then return end
zonename = nil
for l in fd:lines() do
  zone = string.match(l, "^[ \t]*ZONE[ \t]*=[ \t]*\"?([^ \t\n\"]*)");
  if zone then
    zonename = "/usr/share/zoneinfo/" .. zone
    break
  end
end
fd:close()
if not zonename then return end
fd = io.open(zonename)
if not fd then return end
data = fd:read("*a")
fd:close()
if not data then return end
update("/etc/localtime", data)
update("/var/spool/postfix/etc/localtime", data)
%endif

%post common-extra -p <lua>
-- cp -f /usr/lib/locale/locale-archive-extra.tmpl /usr/lib/locale/locale-archive.tmpl
if posix.access("/etc/ld.so.cache") then
  if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
    pid = posix.fork()
    if pid == 0 then
      posix.exec("%{_prefix}/sbin/build-locale-archive")
    elseif pid > 0 then
      posix.wait(pid)
    end
  end
end

%postun common-extra -p <lua>
posix.exec("cp -f /usr/lib/locale/locale-archive-ja.tmpl /usr/lib/locale/locale-archive.tmpl")
if posix.access("/etc/ld.so.cache") then
  if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
    pid = posix.fork()
    if pid == 0 then
      posix.exec("%{_prefix}/sbin/build-locale-archive")
    elseif pid > 0 then
      posix.wait(pid)
    end
  end
end

%triggerun -- common-extra
posix.exec("cp -f /usr/lib/locale/locale-archive-ja.tmpl /usr/lib/locale/locale-archive.tmpl")
if posix.access("/etc/ld.so.cache") then
  if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
    pid = posix.fork()
    if pid == 0 then
      posix.exec("%{_prefix}/sbin/build-locale-archive")
    elseif pid > 0 then
      posix.wait(pid)
    end
  end
end

%pre headers
# this used to be a link and it is causing nightmares now
if [ -L %{_prefix}/include/scsi ] ; then
  rm -f %{_prefix}/include/scsi
fi

%pre -n nscd
getent group nscd >/dev/null || /usr/sbin/groupadd -g 28 -r nscd
getent passwd nscd >/dev/null ||
  /usr/sbin/useradd -M -o -r -d / -s /sbin/nologin \
		    -c "NSCD Daemon" -u 28 -g nscd nscd

%post -n nscd
%if %{with systemd}
%systemd_post nscd.service
%else
/sbin/chkconfig --add nscd
%endif

%preun -n nscd
%if %{with systemd}
%systemd_preun nscd.service
%else
if [ $1 = 0 -o -x /bin/systemctl ] ; then
  /sbin/service nscd stop > /dev/null 2>&1
  /sbin/chkconfig --del nscd
fi
%endif

%postun -n nscd
if [ $1 = 0 ] ; then
  /usr/sbin/userdel nscd > /dev/null 2>&1 || :
fi
%if %{with systemd}
%systemd_postun_with_restart nscd.service
%else
if [ "$1" -ge "1" ]; then
  service nscd condrestart > /dev/null 2>&1 || :
fi
%endif


%clean
rm -rf "$RPM_BUILD_ROOT"
rm -f *.filelist*


%ifnarch %{auxarches}
%files -f glibc.filelist
%defattr(-,root,root)
/sbin/ldconfig
/%{_lib}/libnsl.so.*
%dir %{_prefix}/%{_lib}/audit
%if %{with systemd}
%exclude /etc/localtime
%else
%verify(not md5 size mtime) %config(noreplace) /etc/localtime
%endif
%verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf
%verify(not md5 size mtime) %config(noreplace) /etc/ld.so.conf
%verify(not md5 size mtime) %config(noreplace) /etc/rpc
%dir /etc/ld.so.conf.d
%dir %{_prefix}/libexec/getconf
%dir %{_prefix}/%{_lib}/gconv
%dir %{_localstatedir}/db
%{_localstatedir}/db/Makefile
%dir %attr(0700,root,root) /var/cache/ldconfig
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/cache/ldconfig/aux-cache
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/ld.so.cache
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/gai.conf
%doc rpm-old-changelog.txt
%doc README NEWS INSTALL elf/rtld-debugger-interface.txt
%license COPYING COPYING.LIB LICENSES

%files -f common.filelist common
%defattr(-,root,root)
%dir %{_datadir}/locale
%dir %{_prefix}/lib/locale
%dir %{_prefix}/lib/locale/C.utf8
%{_prefix}/lib/locale/C.utf8/*
%attr(0644,root,root) %verify(not md5 size mtime) %{_prefix}/lib/locale/locale-archive-ja.tmpl
%attr(0644,root,root) %verify(not md5 size mtime) %{_prefix}/lib/locale/locale-archive.tmpl
%attr(0644,root,root) %verify(not md5 size mtime mode) %ghost %config(missingok,noreplace) %{_prefix}/lib/locale/locale-archive
%dir %{_prefix}/share/locale
%dir %{_prefix}/share/locale/ja
%doc documentation/README.timezone
%doc documentation/gai.conf

%files common-extra -f common-extra.filelist
%defattr(-,root,root)
%attr(0644,root,root) %verify(not md5 size mtime) %{_prefix}/lib/locale/locale-archive-extra.tmpl

%files locale-source
%defattr(-,root,root)
%dir %{_prefix}/share/i18n/locales
%{_prefix}/share/i18n/locales/*
%dir %{_prefix}/share/i18n/charmaps
%{_prefix}/share/i18n/charmaps/*

%files -f devel.filelist devel
%defattr(-,root,root)

%files -f static.filelist static
%defattr(-,root,root)

%files -f headers.filelist headers
%defattr(-,root,root)

%files -f utils.filelist utils
%defattr(-,root,root)

%files -f nscd.filelist -n nscd
%defattr(-,root,root)
%config(noreplace) /etc/nscd.conf
%if %{with systemd}
%{_unitdir}/*
%{_tmpfilesdir}/*
%else
%config /etc/rc.d/init.d/nscd
%endif
%dir %attr(0755,root,root) /var/run/nscd
%dir %attr(0755,root,root) /var/db/nscd
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid
%attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/group
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/hosts
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/services
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/passwd
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/group
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/hosts
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/db/nscd/services
%ghost %config(missingok,noreplace) /etc/sysconfig/nscd
%endif

%if %{build_compat32}
%files -f compat32-glibc.filelist
/%{_lib}/libnsl.so.*

%files devel -f compat32-devel.filelist
%defattr(-,root,root)
%exclude %{_prefix}/share

%files static -f compat32-static.filelist
%defattr(-,root,root)
%endif


%changelog
* Sat Sep 10 2022 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.36-1
- updated to 2.36.

* Sat Jan 29 2022 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-6
- updated Patch0.

* Sat Jan 22 2022 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-5
- updated Patch0.

* Tue Nov 09 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-4
- updated Patch0.

* Tue Nov 02 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-3
- updated Patch0.
- dropped install-info scriptlets.
- built compat32-* on x86_64.

* Tue Aug 24 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-2
- imported Patch0 from upstream.

* Wed Aug 04 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.34-1
- updated to 2.34.
- dropped Patch0, 3 and 12.
- dropped Patch20000 and 20001: fixed in upstream.

* Thu Jun 03 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.33-4
- updated Patch0.
- imported Patch20000 and 20001 from upstream to fix CVE-2021-33574.

* Sat Apr 10 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.33-3
- updated Patch0.
- built with gcc-10.3.

* Mon Mar 08 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.33-2
- updated Patch0.
- added filetriggers.

* Tue Feb 09 2021 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.33-1
- updated to 2.33.
- updated Patch0.
- dropped Patch1, 5, 7 and 14.
- updated Source11.
- updated Source1.

* Sat May 09 2020 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.31-2
- updated Patch0.
- added systemd support (disabled as default).
- dropped /sbin/ldconfig from compat32.

* Thu Mar 19 2020 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.31-1
- updated to 2.31.
- updated Patch0.
- dropped Patch28.
- imported Patch29 from rawhide.
- updated Patch5 and 23.
- updated Source11.

* Sun Sep 22 2019 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.30-1
- updated to 2.30.
- updated Patch0.
- dropped Patch11, 24 and 25.

* Sun Jan 20 2019 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.28-1
- updated to 2.28.
- dropped Source2, 3, 10 and 11.
- imported Source8-11 from rawhide.
- dropped Patch11-13.
- imported Patch1-28 from rawhide.
- dropped Patch10000.
- trimmed %%changelog: old logs are rpm-old-changelog.txt.

* Tue Jun 20 2017 Satoshi IWAMOTO <satoshi.iwamoto@nifty.ne.jp> 2.23-5
- add patch20005 for fix CVE-2017-1000366

* Mon Aug  1 2016 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.23-4
- added Patch20000-20004 to fix vulnerabilities.
  - CVE-2016-1234
  - CVE-2016-3075
  - CVE-2016-3706
  - CVE-2016-4429

* Sun Jun 26 2016 Yoji TOYODA <bsyamato@sea.plala.or.jp> 2.23-3
- rebuilt with gcc-5.4.0

* Tue May 24 2016 Tomohiro "Tomo-p" KATO <tomop@teamgedoh.net> 2.23-2
- rebuilt with new binutils.

* Sat May 07 2016 Yoji TOYODA <bsyamato@sea.plala.or.jp> 2.23-1
- update to 2.23
- remove Patch14-18
- update SOURCE1 from fedora