久保田 <kubota@xxxxxxxxxxxxx> wrote: > ARAID99 1000を使っています。 うちも同じです。 ちなみに、鳴動するときは、液晶の部分の表示をご確認されたほうが良いかも しれません。 黒字に白抜きの"T"は、温度異常 黒字に白抜きの"F"は、FANの異常 のようです。 取説見ても載ってなくって私も経験するまでわかりませんでした。 ちなみにうちでは、使い始めて半年ぐらいでFANが逝ってしまいそれに伴う温 度異常で、HDの中身が飛んでしまう事件がありました。現在、FANを自分で交 換してとりあえずKernel2.2.25で安定動作中です。Kernel2.4系列では起動中 にpanicが起きて動きません。 M/Bは、A7V600で、dmesgの内容は以下のとおりです。 Linux version 2.2.25-0vl3 (farmer@xxxxxxxxxxxxxxxxx) (gcc version 2.95.3 20010315 (release)) #1 Fri Apr 4 07:11:59 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ 00000000 (usable) BIOS-e820: 3fefb000 @ 00100000 (usable) Detected 1100066 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2195.45 BogoMIPS Memory: 1035828k/1048556k available (1464k kernel code, 412k reserved, 10768k data, 84k init) Dentry hash table entries: 131072 (order 8, 1024k) Buffer cache hash table entries: 524288 (order 9, 2048k) Page cache hash table entries: 262144 (order 8, 1024k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(TM) XP 2500+ stepping 00 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx) PCI: PCI BIOS revision 2.10 entry at 0xf1970 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 524288 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 79 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Split FIFO Configuration: 8 Primary buffers, threshold = 1/2 8 Second. buffers, threshold = 1/2 ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio ide0: VIA Bus-Master (U)DMA Timing Config Success ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA ide1: VIA Bus-Master (U)DMA Timing Config Success hda: ASI ARAID99 1000 Ver1.00, ATA DISK drive hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30) hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x30) hdc: IC35L060AVER07-0, ATA DISK drive hdd: CD-950E/TKU, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ASI ARAID99 1000 Ver1.00, 19574MB w/0kB Cache, CHS=2495/255/63, UDMA(66) hdc: IC35L060AVER07-0, 58644MB w/1916kB Cache, CHS=119150/16/63, UDMA(100) hdd: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 2555.367 MB/sec p5_mmx : 3197.733 MB/sec 8regs : 1479.423 MB/sec 32regs : 1213.485 MB/sec using fastest function: p5_mmx (3197.733 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 hda3 hdc: [PTBL] [7476/255/63] hdc1 autodetecting RAID arrays autorun ... ... autorun DONE. apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 84k freed Adding Swap: 2064344k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.237 $ time 07:20:04 Apr 4 2003 usb-uhci.c: High bandwidth mode enabled EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs: mounted filesystem with ordered data mode. kmem_create: Dup name - uhci_desc kmem_create: Dup name - urb_priv usb-uhci.c: $Revision: 1.237 $ time 07:20:04 Apr 4 2003 usb-uhci.c: High bandwidth mode enabled mice: PS/2 mouse device common for all mice usb.c: registered new driver hid via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT3043 Rhine at 0xd800, 00:00:f4:60:d8:67, IRQ 10. eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 45e1. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. VFS: Disk change detected on device ide1(22,64) -------------------- さかもと mail:msakamoto@xxxxxx --------------------