長谷です > 大里です。 こんばんは > LVD ということは AHA2940UW じゃなくて、AHA2940U2W でしょうか? いえ、UW の方です。U2W は 80MB/s 転送ですよね? (先程、アダプテックのアメリカのサイトで調べました。) ついでなのでこっちに繋げます。 > cat /proc/scsi/aic7xxx/0 で bit 幅と clock を見るとか。 やってみました(以下↓)。 --------------------------------------------------------------------- Adaptec AIC7xxx driver version: 6.2.36 Adaptec 2940 Ultra SCSI adapter aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs Allocated SCBs: 85, SG List Length: 102 Serial EEPROM: 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x0378 0x70b4 0x005b 0x0007 0x0010 0xff00 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0xa89c Target 0 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Channel A Target 0 Lun 0 Settings Commands Queued 21778 Commands Active 13 Command Openings 51 Max Tagged Openings 253 Device Queue Frozen Count 0 Target 1 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Channel A Target 1 Lun 0 Settings Commands Queued 129 Commands Active 0 Command Openings 253 Max Tagged Openings 253 Device Queue Frozen Count 0 Target 2 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 3 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 4 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 5 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Goal: 5.000MB/s transfers (5.000MHz, offset 15) Curr: 5.000MB/s transfers (5.000MHz, offset 15) Channel A Target 5 Lun 0 Settings Commands Queued 1 Commands Active 0 Command Openings 1 Max Tagged Openings 0 Device Queue Frozen Count 0 Target 6 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Goal: 5.000MB/s transfers (5.000MHz, offset 8) Curr: 5.000MB/s transfers (5.000MHz, offset 8) Channel A Target 6 Lun 0 Settings Commands Queued 5 Commands Active 0 Command Openings 1 Max Tagged Openings 0 Device Queue Frozen Count 0 Target 7 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 8 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 9 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 10 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 11 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 12 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 13 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 14 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Target 15 Negotiation Settings User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) --------------------------------------------------------------------- と、こんな感じでした。 ()の中の方の転送速度で動くのでしょうか? > MO と DDS が SCSI-3(20MHz) に対応していないとそうなりませんか。 MO も DDS も SCSI-2 ですから、混在してることになります。 -- 長谷 <VYG01106@xxxxxxxxx>