[vine-users:054458] ssh サーバへ接続に関して。

["yasufumi_ito" <ito@xxxxxxxxxxxxxxxx>]

いつも拝見させていただき、勉強をさせていただいております。
まず、管理者の方に、お礼を述べたいとおもいます。

伊藤と申します。

本題なのですが、　現在、テスト環境構築の為、ｖｉｎｅ２．５をインストールして、
ｓｓｈサーバへ接続を行っております。
クライアントは、ｔｅｒａｔｅｒｍ　＋　ｔｔｓｓｈを利用しているのですが、
ログイン後、コマンドを何も入力しないと、自動的に接続が切れてしまいます。
大体、５分程度で切れてしまうと思われます。
この時間を、少し（１時間程度）伸ばしたいと思うのですが、方法がわからず
助言をいただきたいと思いました。
また、sshd_configの”keepAlive yes”を試しましたが、　変化が無く駄目でした。
このメールの下の部分にsshd_configとssh_configの設定を載せますので、
どうか助言を宜しくお願いいたします。
メールが長文となってしまい、申し訳ありません。

以下はconfigファイルの内容のみとなっています。

==========/sshd_config==================================================
# $OpenBSD: sshd_config,v 1.48 2002/02/19 02:50:59 deraadt Exp $

# This is the sshd server system-wide configuration file.  See sshd(8)
# for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 3600
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 600
PermitRootLogin yes
#PermitRootLogin no
#StrictModes yes

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys

# rhosts authentication should not be used
#RhostsAuthentication no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
# KerberosAuthentication automatically enabled if keyfile exists
#KerberosAuthentication yes
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes

# AFSTokenPassing automatically enabled if k_hasafs() is true
#AFSTokenPassing yes

# Kerberos TGT Passing only works with the AFS kaserver
#KerberosTgtPassing no

# Set this to 'yes' to enable PAM keyboard-interactive authentication
# Warning: enabling this may bypass the setting of 'PasswordAuthentication'
#PAMAuthenticationViaKbdInt yes

#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
KeepAlive no
#keepAlive yes
#UseLogin no

#MaxStartups 10
# no default banner path
#Banner /some/path
#VerifyReverseMapping no

# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
ReverseMappingCheck no
GatewayPorts no
AllowTcpForwarding yes
Protocol 1,2

===============================================================




=============ssh_config =========================================
# $OpenBSD: ssh_config,v 1.15 2002/06/20 20:03:34 stevesk Exp $

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for various options

# Host *


    KeepAlive no
#   ForwardAgent no
#   ForwardX11 no
#   RhostsAuthentication no
#   RhostsRSAAuthentication no
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   BatchMode no
#   CheckHostIP yes
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/identity
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes2
56-cbc
#   EscapeChar ~
Host *
 ForwardX11 yes

========================================================================