野宮様
鈴木です。
本当に、アドバイスをありがとうございます。
でも、だめなのです。
ずうずうしくも、私の「xorg.conf」と「lilo.conf」を添付しました。
何か、アドバイスをいただけると嬉しいです。
別件
liloの情報は、とても嬉しかった。
そのまま、日本語が表示できるようになりました。
-----------------------------------------
xorg.confの内容
-----------------------------------------
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse9" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "unix/:7100"
FontPath "/usr/X11R6/lib/X11/fonts/japanese"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "pex5"
Load "dri"
#Load "dri"
Load "glx"
#Load "pex5"
#Load "record"
#Load "xie"
# font rendering engines
Load "type1"
#Load "xtt"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier "Mouse9"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "AlwaysCore"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0-60.0
VertRefresh 50.0-70.0
Option "dpms"
# -- 1024x480 tazo tukika shimashita
Modeline "1024x480" 65 1024 1032 1176 1344 480 491 492 525 -hsync -vsync
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1280x600 for Toshiba Libretto L*
Modeline "1280x600" 60 1280 1328 1512 1712
600 601 603 625
EndSection
Section "Device"
# Option "Rotate"
# Option "pciBurst"
# Option "ShadowFB"
# Option "NoStretch"
# Option "LcdCenter"
Option "externDisp"
Option "internDisp"
# Option "override_validate_mode"
# Option "noMMIO"
# Option "SWcursor"
# Option "NoAccel"
# Option "NoLinear"
# Option "XaaNoScanlineImageWriteRect" # Normally enabled, disabled for now for Red Hat testing
# Option "XaaNoScanlineCPUToScreenColorExpandFill" # Normally enabled, disabled for now for Red Hat testing
Identifier "NeoMagic MagicMedia 256AV (laptop/notebook)"
Driver "neomagic"
VendorName "NeoMagic MagicMedia 256AV (laptop/notebook)"
BoardName "NeoMagic MagicMedia 256AV (laptop/notebook)"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "NeoMagic MagicMedia 256AV (laptop/notebook)"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Viewport 0 0
Virtual 1024 768
Depth 24
Modes "1024x480"
EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1024x480"
# EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
-----------------------------------------
lilo.confの内容です。
-----------------------------------------
prompt
timeout=50
default=linux
boot=/dev/hda
map=/boot/map
install=menu
message=/boot/message
image=/boot/vmlinuz-2.4.27-0vl7
label=linux
initrd=/boot/initrd-2.4.27-0vl7.img
read-only
root=/dev/hda3
append=" resume2=swap:/dev/hda5"
vga=0x311
other=/dev/hda1
optional
label=win
-----------------------------------------
ここまでです。
-----------------------------------------