kenchanです。 お世話になっております。 /どの様なメッセージが表示されますか？ ＃この後(login失敗の後)、"runlevel 1"で再起動して"/var/log/messages" ＃を調べてみてはいかがでしょう。 / 前回、中司さまより助言いただいて/var/log/messagesを確認しましたが、や はりloginできない原因がわかりません。該当部分だけでも、ちょっとボリュー ムがあるので、躊躇しましたが、敢て載せてみます。 お分かりなる方がいらしゃいましたら、ご助言をお願いいたします。 cups,sshd,haldaemon,avahi-daemon,crond,anacron,atd,Postfixをchkconfig --delしてrunlevel 3で再起動すると/var/log/messagesは次のように表示され、 loginのpassword入力までいきますが、cursorは点滅せず、 promptも出ず、入力 を受け付けません。 Feb 14 22:33:34 localhost syslogd 1.4.1: restart. Feb 14 22:33:34 localhost syslog: syslogd startup succeeded Feb 14 22:33:34 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started. Feb 14 22:33:34 localhost kernel: Linux version 2.6.16-0vl60 (daisuke@xxxxxxxxxxxxxxxxxxxxx) (gcc version 3.3.6 release (Vine Linux 3.3.6-0vl7)) #1 SMP Fri Oct 27 03:39:46 JST 2006 Feb 14 22:33:34 localhost kernel: BIOS-provided physical RAM map: Feb 14 22:33:34 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Feb 14 22:33:34 localhost kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Feb 14 22:33:34 localhost kernel: BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) Feb 14 22:33:34 localhost kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 14 22:33:34 localhost kernel: BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable) Feb 14 22:33:34 localhost kernel: BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data) Feb 14 22:33:34 localhost kernel: BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS) Feb 14 22:33:34 localhost kernel: BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved) Feb 14 22:33:34 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Feb 14 22:33:34 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 14 22:33:34 localhost syslog: klogd startup succeeded Feb 14 22:33:34 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Feb 14 22:33:34 localhost kernel: 0MB HIGHMEM available. Feb 14 22:33:34 localhost kernel: 509MB LOWMEM available. Feb 14 22:33:34 localhost kernel: found SMP MP-table at 000f72a0 Feb 14 22:33:34 localhost irqbalance: irqbalance startup succeeded Feb 14 22:33:34 localhost kernel: DMI present. Feb 14 22:33:34 localhost portmap: portmap startup succeeded Feb 14 22:33:35 localhost kernel: ACPI: PM-Timer IO Port: 0x8008 Feb 14 22:33:35 localhost kernel: ACPI: Local APIC enabled (0). Feb 14 22:33:35 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Feb 14 22:33:35 localhost kernel: Processor #0 15:2 APIC version 20 Feb 14 22:33:35 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Feb 14 22:33:35 localhost kernel: Processor #1 15:2 APIC version 20 Feb 14 22:33:35 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Feb 14 22:33:35 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Feb 14 22:33:35 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 14 22:33:35 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Feb 14 22:33:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Feb 14 22:33:35 localhost rpc.statd[2186]: Version 1.0.9 Starting Feb 14 22:33:35 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Feb 14 22:33:35 localhost kernel: More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. Feb 14 22:33:35 localhost nfslock: rpc.statd startup succeeded Feb 14 22:33:35 localhost kernel: Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP. Feb 14 22:33:35 localhost kernel: LAPIC enabled (0), calling get_smp_config Feb 14 22:33:35 localhost kernel: Using ACPI (MADT) for SMP configuration information Feb 14 22:33:35 localhost kernel: Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Feb 14 22:33:35 localhost kernel: Built 1 zonelists Feb 14 22:33:35 localhost kernel: Kernel command line: ro root=LABEL=/ resume2=swap:/dev/hda5 vga=0x314 Feb 14 22:33:35 localhost kernel: Enabling fast FPU save and restore... done. Feb 14 22:33:35 localhost kernel: Enabling unmasked SIMD FPU exception support... done. Feb 14 22:33:35 localhost kernel: Initializing CPU#0 Feb 14 22:33:35 localhost kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) Feb 14 22:33:35 localhost random: Initializing random number generator: succeeded Feb 14 22:33:35 localhost kernel: Detected 3000.536 MHz processor. Feb 14 22:33:35 localhost kernel: Using pmtmr for high-res timesource Feb 14 22:33:35 localhost kernel: Console: colour dummy device 80x25 Feb 14 22:33:35 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Feb 14 22:33:35 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Feb 14 22:33:35 localhost kernel: Memory: 512116k/522176k available (2166k kernel code, 9508k reserved, 1058k data, 232k init, 0k highmem) Feb 14 22:33:35 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Feb 14 22:33:35 localhost kernel: Calibrating delay using timer specific routine.. 6008.31 BogoMIPS (lpj=12016632) Feb 14 22:33:35 localhost kernel: Mount-cache hash table entries: 512 Feb 14 22:33:35 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Feb 14 22:33:35 localhost kernel: CPU: L2 cache: 512K Feb 14 22:33:35 localhost netfs: Mounting other filesystems: succeeded Feb 14 22:33:35 localhost kernel: CPU: Physical Processor ID: 0 Feb 14 22:33:35 localhost kernel: Intel machine check architecture supported. Feb 14 22:33:35 localhost kernel: Intel machine check reporting enabled on CPU#0. Feb 14 22:33:35 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Feb 14 22:33:35 localhost kernel: Checking 'hlt' instruction... OK. Feb 14 22:33:35 localhost kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Feb 14 22:33:35 localhost kernel: Booting processor 1/1 eip 3000 Feb 14 22:33:35 localhost kernel: Initializing CPU#1 Feb 14 22:33:35 localhost kernel: Calibrating delay using timer specific routine.. 6000.70 BogoMIPS (lpj=12001400) Feb 14 22:33:35 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Feb 14 22:33:35 localhost kernel: CPU: L2 cache: 512K Feb 14 22:33:35 localhost kernel: CPU: Physical Processor ID: 0 Feb 14 22:33:35 localhost kernel: Intel machine check architecture supported. Feb 14 22:33:35 localhost kernel: Intel machine check reporting enabled on CPU#1. Feb 14 22:33:35 localhost kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available Feb 14 22:33:35 localhost kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Feb 14 22:33:35 localhost kernel: Total of 2 processors activated (12009.01 BogoMIPS). Feb 14 22:33:35 localhost kernel: ENABLING IO-APIC IRQs Feb 14 22:33:35 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 14 22:33:35 localhost kernel: checking TSC synchronization across 2 CPUs: passed. Feb 14 22:33:35 localhost kernel: Brought up 2 CPUs Feb 14 22:33:35 localhost kernel: migration_cost=4000 Feb 14 22:33:35 localhost kernel: checking if image is initramfs... it is Feb 14 22:33:35 localhost kernel: Freeing initrd memory: 112k freed Feb 14 22:33:35 localhost kernel: NET: Registered protocol family 16 Feb 14 22:33:35 localhost autofs: automount startup succeeded Feb 14 22:33:36 localhost kernel: ACPI: bus type pci registered Feb 14 22:33:36 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9d8, last bus=1 Feb 14 22:33:36 localhost kernel: PCI: Using configuration type 1 Feb 14 22:33:36 localhost kernel: ACPI: Subsystem revision 20060127 Feb 14 22:33:36 localhost kernel: ACPI: Interpreter enabled Feb 14 22:33:36 localhost kernel: ACPI: Using IOAPIC for interrupt routing Feb 14 22:33:36 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 14 22:33:36 localhost kernel: Uncovering SIS963 that hid as a SIS503 (compatible=1) Feb 14 22:33:36 localhost kernel: Enabling SiS 96x SMBus. Feb 14 22:33:36 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Feb 14 22:33:36 localhost acpid: acpid startup succeeded Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *11) Feb 14 22:33:36 localhost keytable: Loading keymap: Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *9) Feb 14 22:33:36 localhost keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/jp106.kmap.gz Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled. Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *11) Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *11) Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *9) Feb 14 22:33:36 localhost keytable: Loading system font: Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *9) Feb 14 22:33:36 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. Feb 14 22:33:36 localhost kernel: ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. Feb 14 22:33:36 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Feb 14 22:33:36 localhost keytable: findacm: No such file or directory Feb 14 22:33:36 localhost kernel: pnp: PnP ACPI init Feb 14 22:33:36 localhost rc: Starting keytable: succeeded Feb 14 22:33:36 localhost kernel: pnp: PnP ACPI: found 11 devices Feb 14 22:33:36 localhost kernel: usbcore: registered new driver usbfs Feb 14 22:33:36 localhost kernel: usbcore: registered new driver hub Feb 14 22:33:36 localhost kernel: PCI: Using ACPI for IRQ routing Feb 14 22:33:36 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 14 22:33:36 localhost kernel: pnp: 00:04: ioport range 0x8000-0x808f could not be reserved Feb 14 22:33:36 localhost dbus-daemon: Unknown group "netdev" in message bus configuration file Feb 14 22:33:36 localhost kernel: pnp: 00:04: ioport range 0x8090-0x80ff has been reserved Feb 14 22:33:36 localhost messagebus: messagebus startup succeeded Feb 14 22:33:36 localhost kernel: pnp: 00:04: ioport range 0x8100-0x811f has been reserved Feb 14 22:33:36 localhost kernel: pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved Feb 14 22:33:36 localhost kernel: pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved Feb 14 22:33:36 localhost kernel: PCI: Bridge: 0000:00:01.0 Feb 14 22:33:36 localhost kernel: IO window: 9000-9fff Feb 14 22:33:36 localhost kernel: MEM window: ec100000-ec1fffff Feb 14 22:33:36 localhost kernel: PREFETCH window: f0000000-f7ffffff Feb 14 22:33:36 localhost kernel: PCI: Bus 2, cardbus bridge: 0000:00:0c.0 Feb 14 22:33:36 localhost kernel: IO window: 00002400-000024ff Feb 14 22:33:36 localhost kernel: IO window: 00002800-000028ff Feb 14 22:33:37 localhost kernel: PREFETCH window: 30000000-31ffffff Feb 14 22:33:37 localhost kernel: MEM window: 32000000-33ffffff Feb 14 22:33:37 localhost kernel: PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) Feb 14 22:33:37 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 16 Feb 14 22:33:37 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Feb 14 22:33:37 localhost kernel: apm: disabled - APM is not SMP safe. Feb 14 22:33:37 localhost kernel: audit: initializing netlink socket (disabled) Feb 14 22:33:37 localhost kernel: audit(1171492349.600:1): initialized Feb 14 22:33:37 localhost kernel: Total HugeTLB memory allocated, 0 Feb 14 22:33:37 localhost kernel: VFS: Disk quotas dquot_6.5.1 Feb 14 22:33:37 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Feb 14 22:33:37 localhost kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher Feb 14 22:33:37 localhost kernel: Initializing Cryptographic API Feb 14 22:33:37 localhost kernel: io scheduler noop registered Feb 14 22:33:37 localhost kernel: io scheduler anticipatory registered Feb 14 22:33:37 localhost kernel: io scheduler deadline registered Feb 14 22:33:37 localhost kernel: io scheduler cfq registered (default) Feb 14 22:33:37 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 14 22:33:37 localhost kernel: vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 3750k, total 131072k Feb 14 22:33:37 localhost kernel: vesafb: mode is 800x600x16, linelength=1600, pages=135 Feb 14 22:33:37 localhost kernel: vesafb: protected mode interface info at c000:5678 Feb 14 22:33:37 localhost kernel: vesafb: scrolling: redraw Feb 14 22:33:37 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Feb 14 22:33:37 localhost kernel: Console: switching to colour frame buffer device 100x37 Feb 14 22:33:37 localhost kernel: fb0: VESA VGA frame buffer device Feb 14 22:33:37 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states) Feb 14 22:33:37 localhost kernel: ACPI: Thermal Zone [THM0] (57 C) Feb 14 22:33:37 localhost kernel: isapnp: Scanning for PnP cards... Feb 14 22:33:37 localhost kernel: isapnp: No Plug & Play device found Feb 14 22:33:37 localhost kernel: Real Time Clock Driver v1.12ac Feb 14 22:33:37 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones Feb 14 22:33:37 localhost kernel: agpgart: Detected SiS 648 chipset Feb 14 22:33:37 localhost kernel: agpgart: AGP aperture is 64M @ 0xe8000000 Feb 14 22:33:37 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Feb 14 22:33:37 localhost kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Feb 14 22:33:37 localhost kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Feb 14 22:33:37 localhost kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Feb 14 22:33:37 localhost kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Feb 14 22:33:37 localhost kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Feb 14 22:33:37 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 14 22:33:37 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 14 22:33:37 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 14 22:33:37 localhost kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 Feb 14 22:33:37 localhost kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 14 22:33:37 localhost kernel: PCI: Enabling device 0000:00:02.6 (0000 -> 0001) Feb 14 22:33:37 localhost kernel: ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 16 Feb 14 22:33:37 localhost kernel: ACPI: PCI interrupt for device 0000:00:02.6 disabled Feb 14 22:33:37 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Feb 14 22:33:37 localhost kernel: loop: loaded (max 8 devices) Feb 14 22:33:37 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Feb 14 22:33:37 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 14 22:33:37 localhost kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5 Feb 14 22:33:37 localhost kernel: ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17 Feb 14 22:33:37 localhost kernel: SIS5513: chipset revision 0 Feb 14 22:33:37 localhost kernel: SIS5513: not 100%% native mode: will probe irqs later Feb 14 22:33:37 localhost kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller Feb 14 22:33:37 localhost kernel: ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio Feb 14 22:33:37 localhost kernel: ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Feb 14 22:33:37 localhost kernel: hda: SAMSUNG MP0804H, ATA DISK drive Feb 14 22:33:37 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 14 22:33:37 localhost kernel: hdc: DV-W28E, ATAPI CD/DVD-ROM drive Feb 14 22:33:37 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Feb 14 22:33:37 localhost kernel: hda: max request size: 512KiB Feb 14 22:33:37 localhost kernel: hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) Feb 14 22:33:37 localhost kernel: hda: cache flushes supported Feb 14 22:33:37 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 > Feb 14 22:33:37 localhost kernel: hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2193kB Cache, UDMA(33) Feb 14 22:33:37 localhost kernel: Uniform CD-ROM driver Revision: 3.20 Feb 14 22:33:37 localhost kernel: ide-floppy driver 0.99.newide Feb 14 22:33:37 localhost kernel: usbmon: debugfs is not available Feb 14 22:33:37 localhost kernel: usbcore: registered new driver libusual Feb 14 22:33:37 localhost kernel: usbcore: registered new driver hiddev Feb 14 22:33:37 localhost kernel: usbcore: registered new driver usbhid Feb 14 22:33:37 localhost kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Feb 14 22:33:37 localhost kernel: mice: PS/2 mouse device common for all mice Feb 14 22:33:37 localhost kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Feb 14 22:33:37 localhost kernel: md: bitmap version 4.39 Feb 14 22:33:37 localhost kernel: NET: Registered protocol family 2 Feb 14 22:33:37 localhost kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Feb 14 22:33:37 localhost kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes) Feb 14 22:33:37 localhost kernel: TCP bind hash table entries: 16384 (order: 5, 131072 bytes) Feb 14 22:33:37 localhost kernel: TCP: Hash tables configured (established 16384 bind 16384) Feb 14 22:33:37 localhost kernel: TCP reno registered Feb 14 22:33:37 localhost kernel: Initializing IPsec netlink socket Feb 14 22:33:37 localhost kernel: NET: Registered protocol family 1 Feb 14 22:33:37 localhost kernel: NET: Registered protocol family 17 Feb 14 22:33:37 localhost kernel: Starting balanced_irq Feb 14 22:33:37 localhost kernel: Using IPI No-Shortcut mode Feb 14 22:33:37 localhost kernel: Suspend2 Core. Feb 14 22:33:37 localhost kernel: Suspend2 Compression Driver loading. Feb 14 22:33:37 localhost kernel: Suspend2 Encryption Driver loading. Feb 14 22:33:37 localhost kernel: Suspend2 Swap Writer loading. Feb 14 22:33:37 localhost kernel: Suspend2 FileWriter loading. Feb 14 22:33:37 localhost kernel: ACPI wakeup devices: Feb 14 22:33:37 localhost kernel: PCI0 MODM LANC PWRB SLPB LID Feb 14 22:33:37 localhost kernel: ACPI: (supports S0 S3 S4 S5) Feb 14 22:33:37 localhost kernel: Freeing unused kernel memory: 232k freed Feb 14 22:33:37 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input0 Feb 14 22:33:37 localhost kernel: Suspend2 2.2.5: Swapwriter: Signature found. Feb 14 22:33:37 localhost kernel: Suspend2 2.2.5: Resuming enabled. Feb 14 22:33:37 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Feb 14 22:33:37 localhost kernel: EXT3-fs: write access will be enabled during recovery. Feb 14 22:33:37 localhost kernel: input: PS/2 Mouse as /class/input/input1 Feb 14 22:33:37 localhost kernel: input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 Feb 14 22:33:37 localhost kernel: kjournald starting. Commit interval 5 seconds Feb 14 22:33:37 localhost kernel: EXT3-fs: recovery complete. Feb 14 22:33:37 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 14 22:33:37 localhost kernel: PCI: Enabling device 0000:00:0a.0 (0015 -> 0017) Feb 14 22:33:37 localhost kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 19 (level, low) -> IRQ 18 Feb 14 22:33:37 localhost kernel: eth0: r10001.04, the Linux device driver for Realtek Ethernet Controllers at 0x2000, 00:90:f5:3c:a8:82, IRQ 18 Feb 14 22:33:37 localhost kernel: Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter Feb 14 22:33:37 localhost kernel: Driver version:1.04 Feb 14 22:33:37 localhost kernel: Released date:2006/07/07 Feb 14 22:33:37 localhost kernel: Link Status:Not Linked Feb 14 22:33:37 localhost kernel: I/O Base:0x2000(I/O port) Feb 14 22:33:37 localhost kernel: IRQ:18 Feb 14 22:33:37 localhost kernel: PCI: Enabling device 0000:00:03.3 (0000 -> 0002) Feb 14 22:33:37 localhost kernel: ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 Feb 14 22:33:38 localhost kernel: ehci_hcd 0000:00:03.3: EHCI Host Controller Feb 14 22:33:38 localhost kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Feb 14 22:33:38 localhost kernel: ehci_hcd 0000:00:03.3: irq 19, io mem 0xec004000 Feb 14 22:33:38 localhost kernel: ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 14 22:33:38 localhost kernel: usb usb1: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: hub 1-0:1.0: USB hub found Feb 14 22:33:38 localhost kernel: hub 1-0:1.0: 6 ports detected Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 16 Feb 14 22:33:38 localhost kernel: Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0480] Feb 14 22:33:38 localhost kernel: Yenta: Using CSCINT to route CSC interrupts to PCI Feb 14 22:33:38 localhost kernel: Yenta: Routing CardBus interrupts to PCI Feb 14 22:33:38 localhost kernel: Yenta TI: socket 0000:00:0c.0, mfunc 0x01001002, devctl 0x44 Feb 14 22:33:38 localhost kernel: i2c-sis96x version 1.0.0 Feb 14 22:33:38 localhost kernel: Yenta: ISA IRQ mask 0x06d0, PCI irq 16 Feb 14 22:33:38 localhost kernel: Socket status: 30000010 Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 20 Feb 14 22:33:38 localhost kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000! Feb 14 22:33:38 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[ec000000-ec0007ff] Max Packet=[2048] IR/IT contexts=[4/6] Feb 14 22:33:38 localhost kernel: sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 Feb 14 22:33:38 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 21 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.0: irq 21, io mem 0xec001000 Feb 14 22:33:38 localhost kernel: usb usb2: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: hub 2-0:1.0: USB hub found Feb 14 22:33:38 localhost kernel: hub 2-0:1.0: 2 ports detected Feb 14 22:33:38 localhost kernel: usb 1-3: new high speed USB device using ehci_hcd and address 3 Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 22 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.1: irq 22, io mem 0xec002000 Feb 14 22:33:38 localhost kernel: usb usb3: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: hub 3-0:1.0: USB hub found Feb 14 22:33:38 localhost kernel: hub 3-0:1.0: 2 ports detected Feb 14 22:33:38 localhost kernel: usb 1-3: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: PCI: Enabling device 0000:00:03.2 (0010 -> 0012) Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 23 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.2: OHCI Host Controller Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Feb 14 22:33:38 localhost kernel: ohci_hcd 0000:00:03.2: irq 23, io mem 0xec003000 Feb 14 22:33:38 localhost kernel: SCSI subsystem initialized Feb 14 22:33:38 localhost kernel: Initializing USB Mass Storage driver... Feb 14 22:33:38 localhost kernel: usb usb4: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: hub 4-0:1.0: USB hub found Feb 14 22:33:38 localhost kernel: hub 4-0:1.0: 2 ports detected Feb 14 22:33:38 localhost kernel: pccard: PCMCIA card inserted into slot 0 Feb 14 22:33:38 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Feb 14 22:33:38 localhost kernel: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f Feb 14 22:33:38 localhost kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f Feb 14 22:33:38 localhost kernel: cs: IO port probe 0x820-0x8ff: clean. Feb 14 22:33:38 localhost kernel: cs: IO port probe 0xc00-0xcf7: clean. Feb 14 22:33:38 localhost kernel: cs: IO port probe 0xa00-0xaff: clean. Feb 14 22:33:38 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Feb 14 22:33:38 localhost kernel: pcmcia: registering new device pcmcia0.0 Feb 14 22:33:38 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 2 Feb 14 22:33:38 localhost kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline@xxxxxxxxx>) Feb 14 22:33:38 localhost kernel: hostap_cs: Registered netdevice wifi0 Feb 14 22:33:38 localhost kernel: hostap_cs: index 0x01: Vcc 3.3, irq 4, io 0x0100-0x013f Feb 14 22:33:38 localhost kernel: PCI: Enabling device 0000:00:02.7 (0000 -> 0001) Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 16 Feb 14 22:33:38 localhost kernel: wifi0: NIC: id=0x8008 v1.0.1 Feb 14 22:33:38 localhost kernel: wifi0: PRI: id=0x15 v0.3.0 Feb 14 22:33:38 localhost kernel: wifi0: STA: id=0x1f v1.3.4 Feb 14 22:33:38 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Feb 14 22:33:38 localhost kernel: usb 3-1: new full speed USB device using ohci_hcd and address 2 Feb 14 22:33:38 localhost kernel: iptable_filter: Unknown symbol ipt_do_table Feb 14 22:33:38 localhost kernel: iptable_filter: Unknown symbol ipt_unregister_table Feb 14 22:33:38 localhost kernel: iptable_filter: Unknown symbol ipt_register_table Feb 14 22:33:38 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice Feb 14 22:33:38 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Feb 14 22:33:38 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Feb 14 22:33:38 localhost kernel: usbcore: registered new driver usb-storage Feb 14 22:33:38 localhost kernel: USB Mass Storage support registered. Feb 14 22:33:38 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0169 Feb 14 22:33:38 localhost kernel: usbcore: registered new driver usblp Feb 14 22:33:38 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Feb 14 22:33:38 localhost kernel: intel8x0_measure_ac97_clock: measured 55424 usecs Feb 14 22:33:38 localhost kernel: intel8x0: clocking to 48000 Feb 14 22:33:38 localhost kernel: ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 16 Feb 14 22:33:38 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Feb 14 22:33:38 localhost kernel: Vendor: GENERIC Model: USB Storage-SMC Rev: I16A Feb 14 22:33:38 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Feb 14 22:33:38 localhost kernel: Vendor: GENERIC Model: USB Storage-CFC Rev: I16A Feb 14 22:33:38 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Feb 14 22:33:38 localhost kernel: Vendor: GENERIC Model: USB Storage-SDC Rev: I16A Feb 14 22:33:38 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Feb 14 22:33:38 localhost kernel: Vendor: Brother Model: DCP-110C Rev: 1.00 Feb 14 22:33:38 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 14 22:33:38 localhost kernel: Vendor: GENERIC Model: USB Storage-MSC Rev: I16A Feb 14 22:33:38 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Feb 14 22:33:38 localhost kernel: 0:0:0:0: Attached scsi generic sg0 type 0 Feb 14 22:33:38 localhost kernel: 0:0:0:1: Attached scsi generic sg1 type 0 Feb 14 22:33:38 localhost kernel: 0:0:0:2: Attached scsi generic sg2 type 0 Feb 14 22:33:38 localhost kernel: 1:0:0:0: Attached scsi generic sg3 type 0 Feb 14 22:33:38 localhost kernel: 0:0:0:3: Attached scsi generic sg4 type 0 Feb 14 22:33:38 localhost kernel: sd 0:0:0:0: Attached scsi removable disk sda Feb 14 22:33:38 localhost kernel: sd 0:0:0:1: Attached scsi removable disk sdb Feb 14 22:33:38 localhost kernel: sd 0:0:0:2: Attached scsi removable disk sdc Feb 14 22:33:38 localhost kernel: sd 1:0:0:0: Attached scsi removable disk sdd Feb 14 22:33:38 localhost kernel: sd 0:0:0:3: Attached scsi removable disk sde Feb 14 22:33:38 localhost kernel: Non-volatile memory driver v1.2 Feb 14 22:33:38 localhost kernel: floppy0: no floppy controllers found Feb 14 22:33:38 localhost kernel: parport: PnPBIOS parport detected. Feb 14 22:33:38 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Feb 14 22:33:38 localhost kernel: lp0: using parport0 (interrupt-driven). Feb 14 22:33:38 localhost kernel: lp0: console ready Feb 14 22:33:38 localhost kernel: Adding 1044184k swap on /dev/hda5. Priority:-1 extents:1 across:1044184k Feb 14 22:33:38 localhost kernel: ACPI: AC Adapter [ADP0] (on-line) Feb 14 22:33:38 localhost kernel: ACPI: Battery Slot [BAT0] (battery present) Feb 14 22:33:38 localhost kernel: ACPI: Power Button (FF) [PWRF] Feb 14 22:33:38 localhost kernel: ACPI: Power Button (CM) [PWRB] Feb 14 22:33:38 localhost kernel: ACPI: Sleep Button (CM) [SLPB] Feb 14 22:33:38 localhost kernel: ACPI: Lid Switch [LID] Feb 14 22:33:38 localhost kernel: Using specific hotkey driver Feb 14 22:33:38 localhost kernel: ibm_acpi: IBM ThinkPad ACPI Extras v0.12a Feb 14 22:33:38 localhost kernel: ibm_acpi: http://ibm-acpi.sf.net/ Feb 14 22:33:38 localhost kernel: md: Autodetecting RAID arrays. Feb 14 22:33:38 localhost kernel: md: autorun ... Feb 14 22:33:38 localhost kernel: md: ... autorun DONE. Feb 14 22:33:38 localhost kernel: device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx Feb 14 22:33:39 localhost kernel: EXT3 FS on hda3, internal journal Feb 14 22:33:39 localhost kernel: encode_eucjp: module license 'unspecified' taints kernel. Feb 14 22:33:39 localhost kernel: kjournald starting. Commit interval 5 seconds Feb 14 22:33:39 localhost kernel: EXT3 FS on hda2, internal journal Feb 14 22:33:39 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 14 22:33:39 localhost kernel: serial8250: too much work for irq3 Feb 14 22:33:39 localhost kernel: Device not ready. Make sure there is a disc in the drive. Feb 14 22:33:39 localhost kernel: Device not ready. Make sure there is a disc in the drive. Feb 14 22:33:39 localhost kernel: powernow: This module only works with AMD K7 CPUs Feb 14 22:33:39 localhost kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Feb 14 22:33:39 localhost kernel: Netfilter messages via NETLINK v0.30. Feb 14 22:33:39 localhost kernel: ip_conntrack version 2.4 (4079 buckets, 32632 max) - 232 bytes per conntrack K. Matsuda K.Nakatsuka wrote: > 中司と申します。 > > On Wed, 07 Feb 2007 22:29:08 +0900 > 健一 <kenchan@xxxxxxxxxxxxx> wrote: > > >> 「text modeでのlogin画面」と書いたのはrunlevel 3のmultiuser modeの >> console login画面のことです。 >> > 失礼しました。 > > >> なお、avahi-daemonも同じくfreezeしたのでoffにしましたが、 >> 前回、助言いただいた >> 「chkconfig --del "サービス名"」と 「chkconfig --level245 "サービス名" >> off」とは同じと考えていいのでしょうか。 >> > 結果は同じような気もしますが、 > このあたりは、識者の方からのフォローがあると助かります。 > 私は、"--add/--del"で行っています。 > ＃独自の"runlevel"設定したい時に使用するのかな？ > > >> 後者では後でonにしてstartすればいいと思いますが、前者の場合はいかにすれ >> ばよいのでしょうか。 >> > 直接起動は"/etc/rc.d/init.d/<name> start"で良いです。 > 再設定は、chkconfig --add <name> で良いです。 > "/etc/rc.d/init.d/cups"を見ると"# chkconfig: 2345 55 10"という行が > 有ります。"--add"は、これに従ってシンボリックを張ります。（かな？） > > >> window画面（runlevel5のmuitiuser mode)でlogin画面に行き着けないのは、X >> Window Systemのせいのようですが、runlevel3でのlogin画面まで到達しても >> loginできないのが、よくわからないです。 >> > どの様なメッセージが表示されますか？ > ＃この後(login失敗の後)、"runlevel 1"で再起動して"/var/log/messages" > ＃を調べてみてはいかがでしょう。 > > > > >