先日、Vine2.5をインストールしたのですが、音が出ません。インストールCDはUNIX USERの6月号を使用しました。
使用パソコン: VAIO PCG-FX33G
CDドライブにCDを入れると、起動するのですが音がでません。sndcfgコマンドではサウンドモジュールがありません、とエラーメッセージが出ました。
Linuxを始めたばかりの初心者で、どうにかインストールはしたものの音の設定の仕方もわかりません。質問の仕方もこれでいいのか不安なのですが、どなたかおわかりになる方がおられたらご教示ください。
以下は起動時のメッセージです。
Linux version 2.4.18-0vl3 (sagami@xxxxxxxxxxxxxxxxxxx) (gcc version 2.95.3 20010315 (r
elease)) #1 Thu Mar 7 18:23:04 JST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007cf0000 (usable)
BIOS-e820: 0000000007cf0000 - 0000000007cff000 (ACPI data)
BIOS-e820: 0000000007cff000 - 0000000007d00000 (ACPI NVS)
BIOS-e820: 0000000007d00000 - 0000000007e80000 (usable)
BIOS-e820: 0000000007e80000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 32384
zone(0): 4096 pages.
zone(1): 28288 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 BOOT_FILE=/boot/vmlinuz-2.4.18-
0vl3
Initializing CPU#0
Detected 695.575 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1389.36 BogoMIPS
Memory: 124724k/129536k available (1360k kernel code, 4356k reserved, 451k data, 216k
init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Sony Vaio laptop detected.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Non-volatile memory driver v1.1
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 3
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHM2200AT, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-R2002, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0330bc0, I/O limit 4095Mb (mask 0xffffffff)
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(66)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
bond0 registered without MII link monitoring, in bonding mode.
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@ncm.
com)
Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
ide-floppy driver 0.97.sv
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
Real Time Clock Driver v1.10e
Adding Swap: 1052248k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:1f.2
IRQ routing conflict for 00:1f.2, have irq 9, want irq 10
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0x1820, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0x2400, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP e
nabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 9 for device 00:1f.6
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Sharing IRQ 9 with 00:1f.5
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_conntrack (1012 buckets, 8096 max)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxx
om.sg> and others
PCI: Found IRQ 9 for device 01:08.0
eth0: Intel Corp. 82820 (ICH2) Chipset Ethernet Controller, 08:00:46:28:74:F8, IRQ 9.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: No IRQ known for interrupt pin A of device 01:02.0. Please try using pci=biosirq.
PCI: No IRQ known for interrupt pin B of device 01:02.1. Please try using pci=biosirq.
Yenta IRQ list 08b8, PCI irq0
Socket status: 30000006
Yenta IRQ list 08b8, PCI irq0
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.1.0 20010616 on minor 0
mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary
memory : c7b7df60
memory : 00000000
memory : c7b7dfa0