さわみです。
From: Kouzou Tsukiyama <tukiyama@xxxxxxxxxxxxxxxxxxx>
Subject: [vine-users:061480] Re: DVI 接続
Date: Thu, 24 Jul 2003 15:51:42 +0900
Message-ID: <20030724154244.1939.TUKIYAMA@xxxxxxxxxxxxxxxxxxx>
> > > 800x600 ではうまく動作します。mga では 1024x768 が限界でしょうか?
> > > 先ほどからやっているのですが、1280x1024 で動かそうとしているとこ
> > > ろです。
> >
> > 動くと思いますよ。
> > 試しに、手元の環境で XF86Config-4 の Modes を 1280x1024 に書き換
> > えてみたら、きちんと（？）LCD からはみ出した画面が表示されました。
> > HorizSync 等の値が正しいかもう一度調べてみては。
>
> HorizSync は手で入力して合わせました。XF86Config-4 の Modes を 1280x1024
> に書き換えましたが。何がおかしいのでしょうか？まだ、800x600 のままです。
>
> XF86Coonfig の何処かを設定しないといけないのでは？ないかと思ったりして
> います。XF86Config-4 を添付して下さるとあり難いですが、失礼でしょうか。
anaconda が作ったものに、FontPath を適当に書き換えて "Device" に
"hw cursor" 設定を加えた程度ですけれども。昔のように人の設定を参
考にしながらゴリゴリ書くこともなくなっちゃいました。
他には、Matrox 配布のドライバをインストールするときに HAL library
と DRI module も併せて入れたことくらいでしょうか。
--
SAWAMI Hiroaki (沢味 広明)
hiro-s@xxxxxxxxxxxxxx
hiro@xxxxxxxxxxxxx
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse9" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscale"
FontPath "/usr/X11R6/lib/X11/fonts/japanese"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "pex5"
Load "dri"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
# font rendering engines
Load "type1"
Load "xtt"
# Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
# Modified by mouseconfig
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "MouseManPlusPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse9"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "AlwaysCore"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 50-70
Option "dpms"
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1280x600 for Toshiba Libretto L*
Modeline "1280x600" 60 1280 1328 1512 1712
600 601 603 625
EndSection
Section "Device"
# no known options
Identifier "Matrox Millennium G550"
Driver "mga"
VendorName "Matrox Millennium G550"
BoardName "Matrox Millennium G550"
Option "hw cursor" "off"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "Matrox Millennium G550"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection