お世話になります。堀口です。
先日、部屋の模様替えで、コンピュータも動かしたのですが、その後、調子が悪くなりました。立ち上がりはするのですが、どうも、PCIで接続されている
ハードウェアが、全く認識されないようです。バイオスの関係かとも思ったのですが、私の分かる範囲では問題なさそうですし、ちゃんと作動していた時と替
わったところも無いようでした。一応、Cモスの電池を交換してみたのですが、変わりません。USBのメモリーを使って、dmesgの結果をファイルには
きましたので、添付致します。
どなたか、何か御分かりになったら、ぜひ、何が原因でこうなったのか、そしてどうすれば直るかなど御教えください。
どうぞ、よろしくお願い申し上げます。
堀口
2 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APCE] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:0)
00:00:01[A] -> 2-23 -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0)
00:00:02[A] -> 2-20 -> IRQ 20
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0)
00:00:02[B] -> 2-22 -> IRQ 22
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0)
00:00:02[C] -> 2-21 -> IRQ 21
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 20
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:0)
00:01:06[A] -> 2-18 -> IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:0)
00:01:06[B] -> 2-19 -> IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:0)
00:01:06[C] -> 2-16 -> IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:0)
00:01:06[D] -> 2-17 -> IRQ 17
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 1 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 0 0 1 1 D9
11 001 01 1 1 0 0 0 1 1 E1
12 001 01 1 1 0 0 0 1 1 C9
13 001 01 1 1 0 0 0 1 1 D1
14 001 01 1 1 0 0 0 1 1 B1
15 001 01 1 1 0 0 0 1 1 C1
16 001 01 1 1 0 0 0 1 1 B9
17 001 01 1 1 0 0 0 1 1 A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Cannot allocate resource region 0 of device 01:09.0
PCI: Cannot allocate resource region 0 of device 01:0a.0
PCI: Failed to allocate resource 0(0-ff) for 01:09.0
PCI: Failed to allocate resource 0(0-ff) for 01:0a.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
powernow: AMD K7 CPU detected.
powernow: PowerNOW! Technology present. Can scale: nothing.
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
gx-suspmod: error: no MediaGX/Geode processor found!
Software Suspend LZF Compression Driver v1.0
Software Suspend Swap Writer v1.0
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
pty: 256 Unix98 ptys configured
Serial driver version 5.1 (2004-01-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: 00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00CRA1, ATA DISK drive
blk: queue c042ea20, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0x04
ide1: Drive 1 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(33)
hdc: attached ide-cdrom driver.
hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-floppy driver.
hdd: No disk in drive
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Software Suspend 2.0.0.90: Attempting to set blocksize for 305 to 4096.
Software Suspend 2.0.0.90: Swap space signature found.
Software Suspend 2.0.0.90: Suspending enabled.
Software Suspend 2.0.0.90: Checking for image...
Software Suspend 2.0.0.90: This is normal swap space.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 272k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Device 01:0a.0 not available because of resource collisions
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10f
Adding Swap: 1558264k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Intel 810 + AC97 Audio, version 0.24, 19:21:12 Jul 2 2004
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xc400 and 0xc000, MEM 0x0000 and 0x0000, IRQ 21
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe0971000, IRQ 20
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe0973000, IRQ 22
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 00:02.2: irq 21, pci mem e097c000
usb.c: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 00:02.2
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
PCI: Device 01:0a.0 not available because of resource collisions
hub.c: new USB device 00:02.2-1, assigned address 2
usb.c: USB device not accepting new address=2 (error=-71)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, Brother HL-1440 series
PCI: Device 01:0a.0 not available because of resource collisions
hub.c: new USB device 00:02.2-1, assigned address 3
usb.c: USB device not accepting new address=3 (error=-71)
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, Brother HL-1440 series
lp0: using parport0 (polling).
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 288 bytes per conntrack
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
8139too Fast Ethernet driver 0.9.26
8139too: 01:08.0: region #0 not a PIO resource, aborting
Trying to free nonexistent resource <ee000000-ee00ffff>
PCI: Device 01:09.0 not available because of resource collisions
Trying to free nonexistent resource <00000000-000000ff>
Trying to free nonexistent resource <ee010000-ee0100ff>
cdrom: This disc doesn't have any tracks I recognize!