野宮様 山口様 鈴木です。 アドバイスをありがとうございました。 結局、あまり解からないので、XF86Free-4をxorg.confに コピーしちゃいました。 したら、1024x480に近いモードで動くようになりました。 でも、1024x768の仮想モードでうごかしたいですね。 お二人のアドバイスを読み直して、再トライします。 ちなみにXF86Free-4の内容は次のとおりです。 ずうずうしい要望として、仮想モードになる可能性があるならば 指摘をお願いします。 # File generated by anaconda. Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Mouse9" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/TrueType" FontPath "unix/:7100" FontPath "/usr/X11R6/lib/X11/fonts/japanese" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "fbdevhw" Load "pex5" Load "dri" Load "glx" Load "pex5" Load "record" Load "xie" # font rendering engines Load "type1" Load "xtt" # Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" # Option "AutoRepeat" "500 5" # when using XQUEUE, comment out the above line, and uncomment the # following line # Option "Protocol" "Xqueue" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:nocaps" Option "XkbRules" "xfree86" Option "XkbModel" "jp106" Option "XkbLayout" "jp" #Option "XkbVariant" "" #Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse0" # Modified by mouseconfig Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "yes" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Mouse9" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "AlwaysCore" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 20-64 VertRefresh 50-100 Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -hsync -vsync Option "dpms" # -- 1400x1050 -- # 1400x1050 @ 60Hz, 65.8 kHz hsync #Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 70Hz, 76.8 kHz hsync #Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 75Hz, 82.3 kHz hsync #Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 85Hz, 93.2 kHz hsync #Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1280x600 for Toshiba Libretto L* #Modeline "1280x600" 60 1280 1328 1512 1712 600 601 603 625 EndSection Section "Device" # Option "Rotate" # Option "pciBurst" # Option "ShadowFB" Option "NoStretch" # Option "LcdCenter" Option "externDisp" Option "internDisp" # Option "noMMIO" Option "SWcursor" # Option "NoAccel" # Option "NoLinear" Option "XaaNoScanlineImageWriteRect" Option "XaaNoScanlineCPUToScreenColorExpandFill" Identifier "NeoMagic 256 (laptop/notebook)" Driver "neomagic" VendorName "NeoMagic 256 (laptop/notebook)" BoardName "NeoMagic 256 (laptop/notebook)" VideoRam 2560 Option "override_validate_mode" #BusID EndSection Section "Screen" Identifier "Screen0" Device "NeoMagic 256 (laptop/notebook)" Monitor "Monitor0" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x480" Virtual 1024 600 EndSubsection EndSection Section "DRI" Mode 0666 EndSection ----- Original Message ----- From: "野宮 賢 / NOMIYA Masaru" <nomiyac360@xxxxxxxxxxxxxx> To: "vine-users ML" <vine-users@xxxxxxxxxxx> Sent: Sunday, October 30, 2005 12:13 PM Subject: [vine-users:073374] Re: SONY PCG-C1XF Vine3.1でのXの設定について
野宮です。 NeoMagic MagicMedia256AV というのは、Chipset が NM2200 なんですね。m(_ _)m と、すると、Driverを SVGA とすることで、1024x480 で動作可能では? 山口さんに倣い、書いてみました。 --- xorg.conf --- Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Mouse9" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/TrueType" FontPath "unix/:7100" FontPath "/usr/X11R6/lib/X11/fonts/japanese" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "fbdevhw" Load "pex5" Load "dri" Load "glx" Load "type1" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "InputDevice" Identifier "Mouse9" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "AlwaysCore" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" # HorizSync 30.0-60.0 HorizSync 20-64 VertRefresh 50.0-70.0 Option "dpms" # Modeline "1024x480" 65 1024 1032 1176 1344 480 491 492 525 -hsync -vsync Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -hsync -vsync EndSection Section "Device" Option "externDisp" Option "internDisp" Option "override_validate_mode" Identifier "NeoMagic MagicMedia 256AV (laptop/notebook)" Driver "SVGA" VendorName "NeoMagic MagicMedia 256AV (laptop/notebook)" BoardName "NeoMagic MagicMedia 256AV (laptop/notebook)" # New line Chipset "NM2200" VideoRam 2560 EndSection Section "Screen" Identifier "Screen0" Device "NeoMagic" Monitor "Monitor0" # DefaultDepth 24 DefaultDepth 16 Subsection "Display" # Depth 24 Depth 16 Modes "1024x480" # Virtual 1024 768 # Viewport 0 0 EndSubsection EndSection Section "DRI" Mode 0666 EndSection --- 野宮 賢 mail-to: nomiyac360@xxxxxxxxxxxxxx "Bill! You married with Computers. Not with Me!" "No..., with money."