toorukinです。土村さんありがとうございます。 lilo.confに append="acpi=off apm=on resume2=swap:/dev/hda?" を加えて/sbin/liloもやってみましたが、やはり暴走してしまいました。 いろいろ試してみて現在、上記に加え BIOSの設定でCPUのspeed stepを無効にする cpufreqdのデーモンをsetupコマンドでoffにする をしています。 CPUのクロックが常に最低になってしまいますが、 今のところ暴走はしなくなりました。 現状のdmesgをのせておきます。 $dmesg Linux version 2.4.26-0vl15 (daisuke@xxxxxxxxxxxxxxxxxxxxx) (gcc バージョン 3.3.2 20031218 (Vine Linux 3.3.2-0vl8)) #1 2004年 7月 2日 金曜日 19:15:01 JST BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7d0000 (usable) BIOS-e820: 000000000f7d0000 - 000000000f7e0000 (reserved) BIOS-e820: 000000000f7e0000 - 000000000f7e8000 (ACPI data) BIOS-e820: 000000000f7e8000 - 000000000f800000 (ACPI NVS) BIOS-e820: 000000000f800000 - 0000000010000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 247MB LOWMEM available. On node 0 totalpages: 63440 zone(0): 4096 pages. zone(1): 59344 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. Kernel command line: BOOT_IMAGE=linux-noacpi ro root=303 acpi=off apm=on resume2=swap:/dev/hda7 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 730.982 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1458.17 BogoMIPS Memory: 246796k/253760k available (2107k kernel code, 6576k reserved, 746k data, 156k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 730.9549 MHz. ..... host bus clock speed is 132.9008 MHz. cpu: 0, clocks: 1329008, slice: 664504 CPU0<T0:1329008,T1:664496,D:8,S:664504,C:1329008> mtrr: v1.41 (20040107) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Using IRQ router PIIX/ICH [8086/248c] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) powernow: AMD processor not detected. gx-suspmod: error: no MediaGX/Geode processor found! Software Suspend LZF Compression Driver v1.0 Software Suspend Swap Writer v1.0 Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Serial driver version 5.1 (2004-01-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 01:09.0 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa890-0xa897, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa898-0xa89f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23DA-30, ATA DISK drive blk: queue c042ea20, I/O limit 4095Mb (mask 0xffffffff) hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3876/240/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > usb.c: registered new driver usbdevfs usb.c: registered new driver hub mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Software Suspend 2.0.0.90: Attempting to set blocksize for 307 to 4096. Software Suspend 2.0.0.90: Swap space signature found. Software Suspend 2.0.0.90: Suspending enabled. Software Suspend 2.0.0.90: Checking for image... Software Suspend 2.0.0.90: This is normal swap space. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 194k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,3): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 227448 ext3_orphan_cleanup: deleting unreferenced inode 226307 ext3_orphan_cleanup: deleting unreferenced inode 226263 ext3_orphan_cleanup: deleting unreferenced inode 164967 EXT3-fs: ide0(3,3): 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... okay Freeing unused kernel memory: 156k freed Real Time Clock Driver v1.10f Adding Swap: 521600k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal Intel 810 + AC97 Audio, version 0.24, 19:21:12 Jul 2 2004 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 01:09.0 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH3 found at IO 0x9c00 and 0x9800, MEM 0x0000 and 0x0000, IRQ 11 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ADS72 (Analog Devices AD1881A) i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x3bc [PCSPP,TRISTATE] ohci1394: $Rev: 1045 $ Ben Collins <bcollins@xxxxxxxxxx> PCI: Found IRQ 11 for device 01:03.0 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[80100000-801007ff] Max Packet=[2048] usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> hid-core.c: USB HID support drivers usb-uhci.c: $Revision: 1.275 $ time 19:21:50 Jul 2 2004 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 00:02.0 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xa4a0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xa4e0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xa800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ohci1394: $Rev: 1045 $ Ben Collins <bcollins@xxxxxxxxxx> PCI: Found IRQ 11 for device 01:03.0 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[80100000-801007ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001241023054c48] Intel(R) PRO/100 Network Driver - version 2.3.38-k1 Copyright (c) 2004 Intel Corporation PCI: Found IRQ 11 for device 01:08.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 01:09.0 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 Yenta ISA IRQ mask 0x06f8, PCI irq 11 Socket status: 30000010 cs: warning: no high memory space available! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x380-0x38f 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. ttyS01 at port 0x02f8 (irq = 3) is a 16550A parport0: PC-style at 0x3bc [PCSPP,TRISTATE] lp0: using parport0 (polling). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected an Intel(R) 830M Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0x98000000 [drm] AGP 0.99 Aperture @ 0x98000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 mtrr: base(0x98000000) is not aligned on a size(0x300000) boundary PCI: Found IRQ 11 for device 00:02.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 00:1f.1 cdrom: This disc doesn't have any tracks I recognize! Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky > 土村です。 > > $dmesg > > Linux version 2.4.26-0vl15 (daisuke@xxxxxxxxxxxxxxxxxxxxx) (gcc バージョン 3.3.2 20031218 (Vine Linux 3.3.2-0vl8)) #1 2004年 7月 2日 金曜日 19:15:01 JST > > ... > > IBM machine detected. Enabling interrupts during APM calls. > > ACPI: RSDP (v000 IBM ) @ 0x000fe030 > > ACPI: RSDT (v001 IBM Cnote2 0x00001080 IBM 0x00000000) @ 0x0f7e0000 > > ACPI: FADT (v001 IBM Cnote2 0x00001080 IBM 0x00000000) @ 0x0f7e0054 > > ACPI: BOOT (v001 IBM Cnote2 0x00001080 IBM 0x00000000) @ 0x0f7e002c > > ACPI: DSDT (v001 IBM CNOTE2 0x00001080 MSFT 0x0100000c) @ 0x00000000 > > Kernel command line: BOOT_IMAGE=linux ro root=303 resume2=swap:/dev/hda7 > > ... > > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) > > apm: overridden by ACPI. > > apm は動いてないようですね。 > ACPI とどちらを動かすのがよいのか、よくわからないのですが、 > apm を動かすなら /etc/lilo.conf に > append="acpi=off apm=on resume2=swap:/dev/hda?" > ^^^^^^^^^^^^^^^ > を書き加えて /sbin/lilo を実行、ですよね。 > > > > (ちなみにインストール時もパッケージのインストールも終盤というところで > > 落ちてしまう時もあり、何度かやってうまくいきました。) > > 私の知り合いも、内蔵ドライブだとランダムに固まって、 > 外付け USB 接続のドライブでインストールできた、と言ってました。 > なんとなく熱暴走のような気がしています。 > たまたま外付けドライブの転送速度が遅くて、 > うまく冷えてくれただけのような... > > インストール中に CD の回転速度を落としてみる、 > なんてことができると良いと思うのですが、 > hdparm も eject もインストール CD には > 動く状態では入ってないですね... > ----- > 土村 展之 Nobuyuki Tsuchimura > tutimura@xxxxxxxxxxxxxx > http://www.nn.iij4u.or.jp/~tutimura/